Kömmerling K-vision uPVC windows, supply only
uPVC windows in a Klass of their own: K-vision by Kömmerling is a uPVC window system with a recessed, a square-edged and a flush profile look, and a lift-and-slide door in the same system. We supply it made to measure, supply only — no installation — with a quote for your sizes.
uPVC
4 profiles
Flush uPVC profile, 76 mm deep — the choice when there is little depth to spare and aluminium is not an option. If you want a recessed face instead, look at the K-vision Trend.
Square edges and a block-shaped frame, for an elevation where everything has to be crisp. Apart from the profile look, this is the same K-vision as the Trend.
uPVC lift-and-slide door from K-vision. The usual reason to choose it is that your windows are K-vision too.
The sash sits back within the frame, so from outside an opening window is hard to tell from a fixed one. If you want visible square edges instead, choose the Cube.
K-vision Classic
K-vision Cube
K-vision Trend
Kommerling windows: what is K-vision?
K-vision is a uPVC profile system for windows and doors from the range of profine, the profile group behind Kömmerling. That is why you also come across it as "Kommerling K-vision". A fabricator cuts, welds and glazes the profiles into a finished window; we supply that window made to measure and without installation.
Trend, Cube, Classic and the PremiDoor
The K-vision profiles for windows and doors differ mainly in how the window looks from outside. The Trend has a recessed face: the sash sits back in the frame, so an opening window is hard to tell from a fixed one. The Cube is just as deep, 120 mm, but square-edged, with a straight corner weld instead of a mitre; with a woodgrain foil it becomes a uPVC replacement for a timber window. The Classic is flush and, at 76 mm, a good deal shallower, for replacements where the reveal leaves little room. Then there is the PremiDoor, K-vision's lift-and-slide door, so a sliding door next to your windows stays in the same system. Which profiles can be configured today is shown on the cards above.
Colour: proCoverTec or foil
K-vision colour goes onto the profile in one of two ways: as a foil, or as proCoverTec, Kömmerling's own colour finish, which the manufacturer describes as colourfast. On white uPVC there is no layer that can come loose: that is the colour of the material itself. How a coloured profile holds up over the years is not something we have measured ourselves.
Kommerling windows: reviews and quality
We do not publish customer reviews we cannot check. What is established is the system data: K-vision is tested for burglar resistance class 2, for air tightness between 450 and 600 Pa and for fire resistance EW30 and EI30, with EW60 as an option. The Cube comes with hardware approved under SKG, the Dutch security mark. The profiles are lead-free and fully recyclable. The profile system holds a KOMO certificate, the Dutch quality mark for building products: profine Nederland and Kömmerling are listed with a valid certificate in the public KOMO register. That is a property of the profiles, not a mark of ours or of the factory that makes your window. A class always applies to the complete unit, including the hardware and the way it is installed: whoever fits it helps decide whether the result reaches that class.
K-vision detail drawings
For the Trend and the Classic, the detail drawings are on the site: fixed glazing, tilt and turn window and the inward and outward opening door, as a drawing on the page and as a PDF. We do not issue DWG files.
K-vision Trend, Cube, Classic and PremiDoor side by side
The four K-vision systems in figures. Trend: 120 mm frame depth, Uf 1.20 W/m²K, 130 mm sightline and room for 48 mm glass as standard, with a sash set back in the frame. Cube: the same 120 mm, Uf 1.20 and 130 mm sightline, but block-shaped and with a square-cut corner weld. Classic: 76 mm frame depth, Uf 1.10 and 48 mm glass, with a flush look. PremiDoor 76: the lift-and-slide door, with 179 mm installation depth and 76 mm sashes, in two-, three- or four-panel versions and with a low, thermally broken threshold. So the three window profiles share one glass size; the difference is in depth, look and a tenth in the Uf.
Which K-vision profile suits your house
Choose on the look of your elevation and the depth of your wall. If you want an opening window and a fixed window to look almost the same from outside, the Trend is the profile. Replacing timber windows and want to keep that look? Then consider the Cube with a woodgrain foil: the square-cut corner weld is what sets it apart from an ordinary uPVC window. If the reveal is shallow, as in many renovations, the Classic sits 44 mm less deep into the wall than Trend and Cube. If a sliding door to the garden is coming, the PremiDoor keeps you in the same system. If you put a recessed and a flush profile in one elevation, remember that you will see that difference from the street.
Sizes and limits of K-vision windows
Trend, Cube and Classic go up to 3,500 × 2,600 mm with us, with an opening part up to 1,300 mm wide. Those upper limits have not yet been confirmed by the manufacturer; if you are close to them, we confirm the size in the quote. At the lower end the narrowest pane is 200 mm, the narrowest door pane 600 mm and the narrowest side panel next to a door 180 mm. A door pane goes no higher than 2,500 mm. For the PremiDoor the brochure gives no maximum size, so we don't give one either. You order on the overall size of the frame.
Glass, hardware and insulation in a K-vision window
You choose the glass per pane: HR++ double (Ug 1.1), HR+++ triple (Ug 0.6), obscure glass, or laminated safety glass P4A in double (Ug 1.0) and triple (Ug 0.6). The configurator checks whether your glass fits the 48 mm of the profile. Work with Uw, the value of the whole window, which is also what Part L asks for: the Uf of 1.10 or 1.20 is the profile alone, and in a large pane the glass weighs more than the frame. How burglar-resistant a window is in practice depends on profile, hardware and the way it is fitted.
Ordering K-vision windows: quote, delivery and lead time
You put your K-vision window together in the configurator, with profile, size, layout, glass and colour. Within three working days you have your made-to-measure quote. After acceptance production takes 6 to 8 weeks; delivery to the UK is quoted with your offer. We supply, we don't install: an installer near you fits a K-vision window into an existing opening or a subframe.
Opening types
K-vision Classic — Fixed glazing with mullion · K-vision Classic — Tilt and turn window · K-vision Classic — Inward opening door, DTS threshold and side panel · K-vision Classic — Outward opening door, DTS threshold and side panel · K-vision Trend — Fixed glazing with mullion · K-vision Trend — Tilt and turn window · K-vision Trend — Inward opening door, DTS threshold · K-vision Trend — Outward opening door, DTS threshold
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
K-vision by Kommerling: frequently asked questions
Is K-vision made by Kömmerling?
Yes, in the sense most people mean it: K-vision comes from the profile range of profine, the group that Kömmerling (Kommerling) belongs to. The window itself is made by a fabricator who processes the profiles.
Does K-vision have a KOMO certificate?
The profile system does: profine Nederland and Kömmerling Chemische Fabrik (certificate K21725/05) are listed with a valid KOMO certificate in the public register. KOMO is the Dutch quality mark for building products; the certificate is a property of the profiles. It is not a Rovenzia mark and not a certificate of the factory that makes your window.
Which K-vision profiles does Rovenzia supply?
The Trend, the Cube and the Classic for windows and doors, and the PremiDoor as a lift-and-slide door — all uPVC. Each has its own page with a cross-section, specifications and the layouts you can put together with it. The cards at the top of this page show which can be configured today.
What is the difference between Trend, Cube and Classic?
The Trend and the Cube are both 120 mm deep with Uf 1.2; the Trend has a recessed sash, the Cube is square-edged with a straight corner weld. The Classic is flush, 76 mm deep and insulates slightly better at Uf 1.1.
Is there a K-vision Trend 76?
No. The Trend is 120 mm deep; 76 mm is a different Kömmerling profile. If you are looking for a flatter 76 mm K-vision profile, look at the Classic.
How much do Kommerling K-vision windows cost?
That depends on the size, the layout, the glass and the colour, which is why we do not give a fixed price. You put your window together in the configurator and receive a quote for your sizes within three working days, in GBP and excluding UK VAT and import duties. Delivery to the UK is quoted with your offer; we do not install.
Can I order a K-vision front door?
You can put together a door in K-vision profile, opening inwards or outwards — both are also in the detail drawings of the Trend and the Classic. The configurator shows which door panels go with it.
Can I buy Kommerling windows supply only?
Yes, that is exactly what we do: K-vision windows made to measure, without a showroom and without installation. We don't claim an official dealer title. You order online on the basis of a quote, and you arrange the fitting yourself or with an installer.
Does K-vision have a sliding door?
Yes, the PremiDoor: a uPVC lift-and-slide door in the same system as the windows. If your windows are K-vision, a PremiDoor keeps the same line.
Is K-vision uPVC or aluminium?
uPVC. If you are looking for aluminium, look at Aluprof or Reynaers in our range.
Which Kommerling windows can I order from you?
Those in the K-vision system. The profile system comes from profine, the group behind Kömmerling; from it we supply the Trend, Cube and Classic as windows and the PremiDoor as a lift-and-slide door, made to measure and supply only. We also carry the Kömmerling 76 MD, an inward-opening profile with a centre seal.
What is the frame depth of K-vision windows?
Trend and Cube are 120 mm deep, the Classic 76 mm. The PremiDoor sliding door has an installation depth of 179 mm with 76 mm sashes.
Which K-vision profile insulates best?
On the profile, the Classic, with Uf 1.10 against 1.20 for Trend and Cube. For the whole window the glass counts for more: with triple glazing (Ug 0.6) the Uw drops considerably for all three.
Can I order K-vision in woodgrain?
Yes, with a woodgrain foil. With the Cube that is the usual choice, because the square-cut corner weld strengthens the look of a timber window.
What is the lead time for K-vision windows?
Production takes 6 to 8 weeks after you accept the quote. You have the quote itself within three working days.
Does triple glazing fit a K-vision window?
The profiles have room for 48 mm glass as standard. Choose triple glazing in the configurator; it tells you straight away whether the combination fits your profile.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote