Gealan uPVC windows and doors
Gealan is the manufacturer behind the S 9000 system: the uPVC profile we carry in six versions, from the entry model to a lift-and-slide door.
uPVC
6 profiles
The simplest of the four S 9000 versions, with a sash that slopes away to the outside. For a square-edged look, choose the Haax; if the profile must project less into the room, choose the Slim; if you want both bevels in one profile, choose the Styl.
The Gealan S 9000 HST is one of our three uPVC lift-and-slide doors, alongside the Rehau Synego lift-and-slide and the Schüco LivIng Slide, and insulates better than both (Uf 1.1 against 1.3). At 194 mm it projects a long way into the room — the aluminium MB-59HS and MB-77HS are much shallower. If your elevation is already S 9000 throughout, this door matches it with no difference in profile look.
The same profile as the Base, but with square edges instead of a sloping sash. This is purely a choice of profile look — technically the two do not differ.
The German version of the S 9000: 82.5 mm deep, six chambers and a centre seal, and the window opens inwards. At Uf 0.89 the profile insulates better than the Dutch S 9000 versions (1.1); if the window has to open outwards, choose one of those.
The S 9000 for a renovation where the interior finish is already fixed: 37.5 mm shallower than the Base and the Haax, with exactly the same performance and the same sightline.
The fourth S 9000 version: combines the 15° bevel of the Base with an extra small 4° angle in the same profile. If you want one clear sloping line, choose the Base; if you want a square-edged look with no bevel at all, choose the Haax.
Gealan S 9000 Base
Gealan S 9000 Haax
Gealan S 9000 Slim
Gealan S 9000 Styl
What is Gealan S 9000?
The S 9000 system seals in three places at once: at the outer frame, in the middle of the chamber and at the sash. Gealan itself calls this a triple-seal system with a flexible centre seal. For you as a buyer, the practical result is that the profile seals the same way in every version — bevelled, square or shallow; the difference between the versions lies in their appearance and frame depth, not in the sealing. In figures, as they appear on our profile pages: Uf 1.10 W/m²K for the Base, Haax and Slim, 1.2 for the Styl and 0.89 for the MD; windows up to 3,200 × 3,200 mm, with an opening sash up to 1,400 mm wide on the Base, Haax, Slim and MD. The lift-and-slide door is built differently: 194 mm deep, 150 mm in view, and up to 6,500 × 2,700 mm with a sliding leaf up to 2,000 mm wide.
Base, Haax, Slim and the lift-and-slide door
Six versions share the same core. The Base slopes outwards at 15°, the Haax is square and block-shaped, the Styl combines a small 4° angle with the 15° bevel of the Base in one profile, and the Slim, at 82.5 mm, is the shallowest of these four Dutch versions — the other three are 120 mm deep, all with the same 119 mm sightline. If you are choosing on looks rather than on technology, you are choosing between these four. Gealan also makes a lift-and-slide door in the same system, so a patio door next to a window in the same elevation keeps the same profile look. The sixth is the S 9000 MD, the German version of the same system: 82.5 mm deep like the Slim, with six chambers, glass up to 52 mm and Uf 0.89 W/m²K, the best figure of any Gealan profile we carry. It only opens inwards — tilt and turn, side-hung, tilt-only or as a door — so if you want a window that opens outwards, one of the Dutch versions is the one to pick.
Colour: acrylcolor instead of foil
At Gealan the colour is not in a foil that can peel away, but in an acrylic layer applied to the profile in the same production process — Gealan calls it acrylcolor and has been making it for more than forty years. The surface is smooth and non-porous, so dust and dirt stick to it less than to a standard foil. We are passing that claim on from the manufacturer and have not measured it ourselves over the years.
Gealan detail drawings
Gealan only releases detailed DWG drawings to fabricators, through the myGEALAN portal — they are not public. What we show on the profile pages comes from our own archive and from the manufacturer brochures that are public; where that is a junction detail rather than a stand-alone profile sketch, we say so. Gealan also makes systems we don't carry, such as the KUBUS, KONTUR and LINEAR window systems, the S 8000 and the SMOOVIO sliding door. If you have come across those names on Gealan's own website: we supply the S 9000 family only, and everything on our Gealan pages is about that family.
The Gealan profiles side by side
Base, Haax, Styl and Slim all have a sightline of 119 mm. Base and Haax are 120 mm deep with Uf 1.10 W/m²K; the Styl is also 120 mm deep, with Uf 1.2. The Slim is 82.5 mm deep, also with Uf 1.10. The S 9000 MD has the same 82.5 mm and 119 mm, but with Uf 0.89 it is the best of the family. The lift-and-slide door is 194 mm deep, has a sightline of 150 mm and Uf 1.10. According to the manufacturer, windows go up to 3,200 × 3,200 mm with a sash up to 1,400 mm wide, the lift-and-slide door up to 6,500 × 2,700 mm with sliding panels up to 2,000 mm. Those sizes have not yet been confirmed to us; the configurator keeps to them.
Gealan S 9000 Base · Gealan S 9000 Haax · Gealan S 9000 Styl · Gealan S 9000 Slim · Gealan S 9000 MD · Gealan S 9000 lift-and-slide door
Gealan S 9000 MD: the inward-opening version
The S 9000 MD is the German version of the same system. MD stands for centre seal: three seals between frame and sash, as with the Dutch versions. The difference is in how the window opens: the MD opens inwards, as is usual in Germany. With 82.5 mm frame depth and Uf 0.89 it is the best-insulating Gealan we supply. Choose it if you want an inward-opening tilt and turn window; if you want a window that opens outwards, choose one of the NL versions.
Gealan windows quality: what you can check
A few figures say more about the quality of a window than a review. With Gealan these are the Uf of the profile (0.89 to 1.2 W/m²K), the three seals between frame and sash, the frame depth that decides how thick the glass may be, and the colour in an acrylic layer instead of a foil. What we don't do is claim quality marks or security ratings: those also depend on the hardware and the fitting, and they belong in your offer, not on this page.
Glass in a Gealan window
In every Gealan profile you choose HR++ double glazing (Ug 1.1) or HR+++ triple glazing (Ug 0.6), both also as obscure glass or as laminated safety glass P4A. Which glass works in your profile and pane size you see in the configurator: a combination that doesn't fit, it won't allow. The U-value of the whole window, which Part L asks for, is in your offer.
Fitting Gealan windows
We supply Gealan windows; we don't install. Your own installer takes out the old windows and fits the new ones, and notifies the work under a competent person scheme such as FENSA or Certass, or you notify building control beforehand. You measure yourself. Delivery to the UK is quoted with your offer.
Gealan windows prices
We don't have a fixed price list for Gealan: the price depends on the profile, the size, the layout, the glass and the colour. The profile pages show a guide price where one has been measured, and your quote gives the price for your windows. You have that quote within three working days.
How to order Gealan windows from us
In the configurator, choose uPVC and a Gealan profile, put together the layout, size, glass and colour for each position, and send the request without an account. Within three working days you have the quote with a drawing and price per window; after your acceptance, production takes 6 to 8 weeks.
Opening types
Gealan S 9000 Base — Detail drawings · Gealan S 9000 Haax — Detail drawings · Gealan S 9000 Slim — Detail drawings · Gealan S 9000 Styl — Detail drawings
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Frequently asked questions about Gealan
Which Gealan profiles does Rovenzia carry?
Six: the S 9000 Base, Haax, Styl and Slim (all for windows and doors), the S 9000 MD for inward-opening windows and doors, and the S 9000 lift-and-slide door. Each has its own profile page with a cross-section, specifications and a guide price.
What is the difference between Base, Haax, Styl and Slim?
The sightline is the same on all four. The difference is in shape and frame depth: the Base slopes away at 15°, the Haax is square and block-shaped, the Styl combines a small 4° angle with the 15° bevel of the Base, and the Slim is the shallowest at 82.5 mm — the other three are 120 mm deep.
Does a Gealan window discolour?
White uPVC has no foil or paint layer that can discolour or peel: the white is the colour of the material itself. On a coloured profile the colour is in the acrylcolor layer; how that holds up over the years we have not measured ourselves — it is a claim from the manufacturer.
Can I get a Gealan detail drawing?
Not from us: Gealan only releases DWG detail drawings to fabricators, through the myGEALAN portal. What you see on our profile pages is what we have checked ourselves and are allowed to show.
Is Gealan uPVC or aluminium?
uPVC. If you would rather have aluminium, look at Aluprof or Reynaers in our range. Every Gealan system we supply is uPVC, the lift-and-slide door included; on a coloured profile the colour sits in the acrylcolor layer rather than in a foil.
Which Gealan uPVC windows do you supply?
The S 9000 NL in Base, Haax, Slim and Styl, the German S 9000 MD, and the S 9000 lift and slide door. Each profile has its own page.
Do you have a Gealan sliding patio door?
Yes, the Gealan S 9000 lift and slide door: up to 6,500 mm wide.
What do Gealan windows cost?
The price for your sizes is in the quote within three working days, in GBP excl. VAT and import duties. We supply Gealan windows made to measure, without fitting.
What is the difference between Gealan S 9000 NL and S 9000 MD?
The NL versions (Base, Haax, Styl, Slim) are made for Dutch building practice. The MD is the German version, which opens inwards, with 82.5 mm frame depth and Uf 0.89.
Which Gealan profile insulates best?
The S 9000 MD, with Uf 0.89 W/m²K. Base, Haax and Slim sit at 1.10 and the Styl at 1.2.
How big can a Gealan window be?
According to the manufacturer up to 3,200 × 3,200 mm, with a sash up to 1,400 mm wide. Those sizes have not yet been confirmed to us; the configurator keeps track of them.
Do you fit Gealan windows in the UK?
No. We supply, we don't install: your own installer fits them and notifies the work. Delivery to the UK is quoted with your offer.
What is the lead time for Gealan windows?
Production takes 6 to 8 weeks after you accept the quote. You have the quote itself within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote