Skip to content
Made to measure to the millimetre Reply within one working day Delivery to the UK, quoted with your offer Size guarantee on every window and door
Rovenzia United Kingdom
Home/ Profiles/Schüco
Schüco

Schüco uPVC windows and doors

Schüco windows at Rovenzia: the uPVC LivIng range in four window and door versions and the LivIng Slide lift-and-slide door, each with its own page. Schüco also makes aluminium profiles; we do not carry those.

Request a quote
Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered
uPVC

uPVC

5 profiles

Corner section of Schüco LivIng City: a corner cut from the frame so you can see how the profile is built up
Schüco LivIng CitySchüco · Uf 1.10 · 120 mm
120 mm92 mm

The LivIng Variant with the sash recessed into the frame and flat lines: uPVC at 120 mm frame depth, 6+1 chambers, sightline from 92 mm, glass up to 52 mm, Uf 1.1. If you want the same family shallower (82 mm), choose the Vlak; with a bevelled edge, the Verdiept 6° or 15°.
Corner section of Schüco LivIng Slide: a corner cut from the frame so you can see how the profile is built up
Schüco LivIng SlideSchüco · Uf 1.30 · 194 mm
194 mm180 mm

Schüco's uPVC lift-and-slide door: 82 mm leaf with four chambers and a steel core, Uf 1.3 W/m²K, glass up to 54 mm and a flat threshold with fourteen chambers; the frame is 194 mm deep and a single leaf can be up to 3,200 × 2,600 mm.
Corner section of Schüco LivIng Verdiept 15: a corner cut from the frame so you can see how the profile is built up
Schüco LivIng Verdiept 15Schüco · Uf 1.10 · 120 mm
120 mm140 mm

The LivIng Variant with the sash recessed 15° into the frame: uPVC at 120 mm frame depth, 90 mm outer frame, frame and sash together 140 mm on view, Uf 1.1. The difference from the Verdiept 6° is the angle of the recess; if you want the sash flush with the frame, choose the Vlak (82 mm).
Corner section of Schüco LivIng Verdiept 6: a corner cut from the frame so you can see how the profile is built up
Schüco LivIng Verdiept 6Schüco · Uf 1.10 · 120 mm
120 mm140 mm

The LivIng Variant with the sash recessed 6° into the frame: uPVC at 120 mm frame depth, 90 mm outer frame, frame and sash together 140 mm on view, Uf 1.1. The difference from the Verdiept 15° is the angle of the recess; if you want the sash flush with the frame, choose the Vlak (82 mm).
Corner section of Schüco LivIng Vlak: a corner cut from the frame so you can see how the profile is built up
Schüco LivIng VlakSchüco · Uf 1.00 · 82 mm
82 mm120 mm

The LivIng version with the sash flush with the frame, for a calm, continuous elevation. This is the LivIng 82: 82 mm deep, seven chambers, Uf from 0.96 — the shallowest of the four; City and Verdiept are 120 mm deep.
Cross-section

Schüco LivIng Verdiept 15

System cross-section of the Schüco LivIng Verdiept 15° in the Rovenzia drawing style, vertical section through head, tilt and turn sash and sill, sash 82 mm deep with steel box reinforcement, frame 140 mm with rebate stop, glass 24 to 52 mm
Vertical section — Systemschnitt 15°, outer frame with tilt and turn sash
sash 82 mm deep · outer frame 140 mm with rebate upstand (120 without) · glazing rebate 67 mm · glass 24 to 52 mm
System cross-section of the Schüco LivIng Verdiept 15° in the Rovenzia drawing style, mullion (T-profile 120 by 92 mm) with an 82 mm deep tilt and turn sash with steel box reinforcement, glass 24 to 52 mm
Mullion (T-profile) with tilt and turn sash — Systemschnitt 15°
T-profile 120 mm deep and 92 mm wide · sash 82 mm deep · glazing rebate 67 mm · glass 24 to 52 mm
Cross-section

Schüco LivIng Verdiept 6

System cross-section of the Schüco LivIng Verdiept 6° in the Rovenzia drawing style, vertical section through head, tilt and turn sash and sill, sash 82 mm deep with steel box reinforcement, frame 140 mm with rebate stop, glass 24 to 52 mm
Vertical section — Systemschnitt 6°, outer frame with tilt and turn sash
sash 82 mm deep · outer frame 140 mm with rebate upstand (120 without) · glazing rebate 67 mm · glass 24 to 52 mm
System cross-section of the Schüco LivIng Verdiept 6° in the Rovenzia drawing style, mullion (T-profile 120 by 92 mm) with an 82 mm deep tilt and turn sash with steel box reinforcement, glass 24 to 52 mm
Mullion (T-profile) with tilt and turn sash — Systemschnitt 6°
T-profile 120 mm deep and 92 mm wide · sash 82 mm deep · glazing rebate 67 mm · glass 24 to 52 mm
Cross-section

Schüco LivIng Vlak

System cross-section of the Schüco LivIng AS from the manufacturer's catalogue, horizontal section through outer frame and tilt and turn sash with steel box reinforcement, 120 mm combined sightline, frame and sash 82 mm deep
Tilt and turn window, sash in outer frame — LivIng AS
sightline frame + sash 120 mm (70 + 50) · frame 82 mm deep · sash 82 mm deep · glazing rebate 67 mm · glass 16 to 54 mm
System cross-section of the Schüco LivIng AS from the manufacturer's catalogue, fixed glass glazed directly into the 82 mm deep frame, 70 mm visible profile
Fixed light — LivIng AS
sightline 70 mm · frame 82 mm deep · glass 16 to 54 mm

Schüco LivIng: the uPVC system

LivIng is Schüco's uPVC window and door system, with a frame depth of 82 mm. The manufacturer describes it as a new generation in fabrication and fitting, with room for glass from 24 to 52 mm thick — a wide margin, from slim double glazing to thick triple glazing with an insulating cavity.

And Schüco's aluminium?

Schüco also makes aluminium profiles — a separate family with its own sightlines and its own frame depth for each system. We do not carry those. If you are looking for aluminium, look at Aluprof and Reynaers; if you want to combine uPVC and aluminium in one elevation, you will see two different profile looks rather than one continuous line.

AD or MD: two ways of sealing

LivIng comes with two seal arrangements: AD (Anschlagdichtung, where the seal sits on the rebate stop of the outer frame) and MD (Mitteldichtung, where the seal sits in the middle of the chamber). That is a property of the profile, not a choice of look — both arrangements look the same, but they seal differently.

Every Schüco profile we carry is on a card above with its own page: the LivIng versions Verdiept 15, Verdiept 6, City and Vlak, and the LivIng Slide lift-and-slide door — which of them can be configured today is set by the cards, not by this sentence. For none of them do we calculate a price automatically — you put the profile together in the configurator and receive a quote made to measure.

Opening types

Opening types

Wide black aluminium glazed wall with two panels, in a living room with a sofa, looking onto a lit terrace and garden in the evening
Aluminium windows made to measure11 profiles
Two white uPVC windows side by side above a windowsill, seen from a dining table, looking onto a lit garden in the evening
uPVC windows made to measure21 profiles
Dark two-panel lift-and-slide door seen from inside at dusk, looking onto a lit garden
Sliding patio doors made to measure9 profiles
Hefschuifpui 2-delig, 3000 × 2300 mm
Anthracite front door with narrow sidelight, seen from a hallway with a wooden bench, looking onto a lit garden in the evening
Composite front doors made to measure15 profiles
Voordeur, 1000 × 2100 mm
Anthracite front door with narrow sidelight, seen from a hallway with a wooden bench, looking onto a lit garden in the evening
Aluminium front doors made to measure8 profiles
Voordeur, 1000 × 2100 mm
Dark French doors, wide open, seen from inside at dusk, looking onto a lit garden
French doors made to measure23 profiles
Dubbele tuindeur, 1600 × 2200 mm
Bifold door folded fully open, leaves stacked to the right, looking from a living room onto a lit terrace with a large planter and garden in the evening
Bifold doors made to measure2 profiles
Vouwwand 4-delig, 3600 × 2300 mm
Black tilt and turn window with handle, closed, beside a sofa, looking onto a lit garden in the evening
Tilt and turn windows made to measure21 profiles
Draaikiepraam, 1200 × 1400 mm
Large fixed window without an opening sash, in a living room with a sofa, looking onto a lit garden in the evening
Picture windows made to measure32 profiles
Vast kozijn, 1500 × 1500 mm
Detail drawings

Schüco LivIng Verdiept 15 — System cross-section 15° · Schüco LivIng Verdiept 6 — System cross-section 6°

Made-to-measure quote

Know what you want? Put it together.

No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.

Request a quote
FAQ

Frequently asked questions about Schüco

Can I order a Schüco window from Rovenzia?

Yes: every Schüco profile on this page has its own page — the LivIng versions and the LivIng Slide, all uPVC; the cards above show which are available today. None of them has an automatic price: you put your window together and receive a quote made to measure.

Does Schüco make uPVC or aluminium?

Both, but at Rovenzia only uPVC: LivIng for windows and doors and LivIng Slide as a lift-and-slide door. For aluminium windows, Aluprof or Reynaers are the brands to look at.

What is the difference between AD and MD on Schüco LivIng?

Both are seal arrangements of the same profile. AD (Anschlagdichtung) seals on the rebate stop of the outer frame; MD (Mitteldichtung) seals in the middle of the chamber. The appearance does not change, the sealing does.

How thick can the glass be in Schüco LivIng?

The manufacturer gives a range of 24 to 52 mm, so from slim double glazing to thick triple glazing.

Which Schüco uPVC windows do you supply?

The LivIng versions Verdiept 15, Verdiept 6, City and Vlak, and the LivIng Slide lift and slide door. We don't supply Schüco aluminium.

Do you supply Schüco windows?

We supply Schüco LivIng uPVC windows made to measure, without fitting. You put them together in the configurator and get a quote within three working days.

Do you have Schüco French doors or sliding doors?

A Schüco lift and slide door, yes: the uPVC LivIng Slide. Schüco French doors and Schüco aluminium we don't supply.

Made-to-measure quote

Configure your window or door

Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.

Request a quote
Request a quote