LivIng AS
Rebate seals: two seals, one on the outside and one on the inside of the sash. The standard version.
Schüco · uPVC
Schüco LivIng Verdiept 6
Schüco's uPVC system with the sash recessed at 6°: 120 mm frame depth, Uf 1.1 W/m²K.
Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered
Schüco LivIng Verdiept 6
The Schüco LivIng Verdiept 6° is the version of the LivIng Variant in which the sash is recessed into the outer frame, with a 6° chamfer on its face — the look most common on Dutch houses, with the sash set back. The system is 120 mm deep; the outer frame is 90 mm wide and, together with the sash, shows a 140 mm sightline (Schüco system manual, Systemschnitt 6°). The sash is 82 mm deep and carries a steel box section; the rebate takes glass from 24 to 52 mm. The stated value for the profile is Uf 1.1 W/m²K. For a sash flush with the outer frame and a shallower frame, see the Vlak (LivIng 82); for straight, clean lines on a recessed sash, see the City.
Detail drawings
The manufacturer's drawings, for each version of this profile. They are on the page itself; you can download the PDF below.
Fixed light
Glass directly in the 90 mm wide outer frame. For a fixed pane next to a door, a top light or a window that doesn't need to open.
T-profile 120 mm deep and 92 mm wide · sash 82 mm deep · glazing rebate 67 mm · glass 24 to 52 mm
Request my quote
Tilt and turn window
Turn it open to clean the outside, tilt it to ventilate. Outer frame and recessed sash together show a 140 mm sightline; the system is 120 mm deep.
sash 82 mm deep · outer frame 140 mm with rebate upstand (120 without) · glazing rebate 67 mm · glass 24 to 52 mm
Request my quote
Door
A back door or garden door on the same system, opening inwards or outwards.
sash 82 mm deep · outer frame 140 mm with rebate upstand (120 without) · glazing rebate 67 mm · glass 24 to 52 mm
Request my quote26 layouts in Schüco LivIng Verdiept 6
From a fixed window to a sliding patio door: every layout this profile can do, each with its own page and a direct way into the configurator.
Windows
Single fixed window in Schüco LivIng Verdiept 6
Standard size 1,500 × 1,500 mm
Windows
Window with a dummy sash in Schüco LivIng Verdiept 6
Standard size 1,500 × 1,500 mm
Windows
Inward-opening casement window in Schüco LivIng Verdiept 6
Standard size 1,000 × 1,400 mm
Windows
Bottom-hung tilt-in window in Schüco LivIng Verdiept 6
Standard size 1,100 × 800 mm
Windows
Fixed window with top light in Schüco LivIng Verdiept 6
Standard size 1,000 × 1,800 mm
Windows
Fixed window with tilt-in top light in Schüco LivIng Verdiept 6
Standard size 1,100 × 1,800 mm
Windows
Tilt and turn with hopper top light in Schüco LivIng Verdiept 6
Standard size 1,100 × 1,800 mm
Windows
2-pane fixed window in Schüco LivIng Verdiept 6
Standard size 1,800 × 1,500 mm
Windows
2-pane window, 1 tilt and turn in Schüco LivIng Verdiept 6
Standard size 1,800 × 1,500 mm
Windows
2-pane window, 2 tilt and turn in Schüco LivIng Verdiept 6
Standard size 1,800 × 1,500 mm
Windows
French casement window in Schüco LivIng Verdiept 6
Standard size 1,600 × 1,500 mm
Windows
3-pane fixed window in Schüco LivIng Verdiept 6
Standard size 2,400 × 1,500 mm
Windows
3-pane window, 1 tilt and turn in Schüco LivIng Verdiept 6
Standard size 2,400 × 1,500 mm
Windows
3-pane window, 2 tilt and turn in Schüco LivIng Verdiept 6
Standard size 2,400 × 1,500 mm
Windows
3-pane window, 3 tilt and turn in Schüco LivIng Verdiept 6
Standard size 2,400 × 1,500 mm
Windows
4-pane fixed window in Schüco LivIng Verdiept 6
Standard size 3,200 × 1,500 mm
Windows
4-pane window, 1 tilt and turn in Schüco LivIng Verdiept 6
Standard size 3,200 × 1,500 mm
Windows
4-pane window, 2 tilt and turn in Schüco LivIng Verdiept 6
Standard size 3,200 × 1,500 mm
Windows
Tilt and turn window with top light in Schüco LivIng Verdiept 6
Standard size 1,200 × 1,800 mm
Doors
Single front door in Schüco LivIng Verdiept 6
Standard size 1,000 × 2,100 mm
Doors
Front door, side panel left in Schüco LivIng Verdiept 6
Standard size 1,450 × 2,100 mm
Doors
Front door, side panel right in Schüco LivIng Verdiept 6
Standard size 1,450 × 2,100 mm
Doors
Front door with two side panels in Schüco LivIng Verdiept 6
Standard size 1,850 × 2,100 mm
Doors
Glazed back door in Schüco LivIng Verdiept 6
Standard size 1,000 × 2,100 mm
Doors
French doors in Schüco LivIng Verdiept 6
Standard size 1,600 × 2,200 mm
Windows
Single tilt and turn window in Schüco LivIng Verdiept 6
Standard size 1,200 × 1,400 mm
What comparable projects cost
How much does a Schüco LivIng Verdiept 6 window cost?
Our guide prices come from our own quote history, and this type has not come up in it for this profile. That is why there is no amount. Just request the quote: we work it out on your own sizes.
The price of a LivIng Verdiept 6 window depends on four things: the overall size, the layout (fixed, tilt and turn, door), the glass and the colour. If there is an amount above this section, it is a guide price from our quote history — not a quote and not a final price; the configurator itself shows no amount. You put your window together, send it as a request, and the price for your sizes is in the offer — you'll hear from us within three working days. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery. Hardware and any discount are in your made-to-measure offer. Delivery to the UK is quoted with your offer. We supply, we don't install, and we don't charge for installation.
Configure and request a quoteSchüco LivIng Verdiept 6 cross-section — tilt and turn and fixed light
The drawings show Systemschnitt 6° from Schüco's system manual for the LivIng Variant, redrawn in our own style: the outer frame, 90 mm wide and 120 mm deep, with the 82 mm deep sash recessed into it — a combined sightline of 140 mm. The closed box section in the sash is the steel reinforcement; the chambers around it are the air that gives the profile its insulation. The second sheet shows the mullion (T-profile) with the same sash.
Vertical section — Systemschnitt 6°, outer frame with tilt and turn sash
sash 82 mm deep · outer frame 140 mm with rebate upstand (120 without) · glazing rebate 67 mm · glass 24 to 52 mm
Top to bottom through head, sash and sill. The sash is 82 mm deep and carries a steel box section; the outer frame measures 140 mm including the rebate upstand and 120 without. You can see the recessed sash contour of this version in the chamfered outer face of the sash. The glass can be 24 to 52 mm thick, in a 67 mm rebate.
Mullion (T-profile) with tilt and turn sash — Systemschnitt 6°
T-profile 120 mm deep and 92 mm wide · sash 82 mm deep · glazing rebate 67 mm · glass 24 to 52 mm
The second sheet shows a different detail: the mullion (T-profile), 120 mm deep and 92 mm wide, where two panes meet, with the same 82 mm sash against it. What the drawing doesn't state is the angle of the recess — Schüco doesn't name the variant in the system manual; see the introduction.
Schüco LivIng Verdiept 6 specifications
| Material | uPVC |
|---|---|
| Uf | 1.10 W/m²K |
| Frame depth | 120 mm |
| Outer frame width | 90 mm |
| Sightline | 140 mm |
| Shape | verdiept |
| Maximum size | × 2,600 mm |
| Maximum sash width | 1,500 mm |
| Size tolerance | ±2 mm up to 1 m, ±3 mm above that |
Move over the drawing to see the dimensions
Uf 1.1 W/m²K is the stated value for the profile from Schüco's system manual for the LivIng Variant. That is the heat transfer of the frame profile itself, not of the whole window — for that, the glass (Ug) and the ratio of frame to glass area count as well. The 120 mm is the system frame depth; the sash itself is 82 mm deep. The system manual doesn't name the 6° angle as such (see the drawing: "variant not named in the source"), but it does show the contour.
This is a schematic cross-section, built from the measured frame depth, frame width and sightline. The chamber layout, seals and reinforcement are not measured — they come from the supplier's technical drawing.
LivIng AS, MD or Alu Inside?
Schüco draws the LivIng in three versions. The profile is the same; the difference is in the seals and in the reinforcement.
LivIng MD
Centre seal: a third seal in the middle of the rebate, between the other two. It divides the rebate into a wet and a dry chamber.
LivIng Alu Inside
Aluminium reinforcement in outer frame and sash instead of the steel box section — shown on the system cross-section as hatched profiles in the chambers.
Which version we supply in your size and colour is shown in the configurator with the profile. If only one is listed, that is the version we supply.
The LivIng Verdiept 6 compared
Same size, same specification. Only the profile differs.
Schüco LivIng Verdiept 6Frame depth 120 mm · This profile
Schüco LivIng Verdiept 15Frame depth 120 mm
Schüco LivIng VlakFrame depth 82 mm
K-vision TrendFrame depth 120 mm
| Specifications | Schüco LivIng Verdiept 6 | Schüco LivIng Verdiept 15 | Schüco LivIng Vlak | K-vision Trend |
|---|---|---|---|---|
| Material | uPVC | uPVC | uPVC | uPVC |
| Uf | 1.10 | 1.10 | 1.00 | 1.20 |
| Frame depth | 120 mm | 120 mm | 82 mm | 120 mm |
| Sightline | 140 mm | 140 mm | 120 mm | 130 mm |
| Maximum size | × 2,600 mm | × 2,600 mm | × 2,600 mm | 3,500 × 2,600 mm |
| Why something else | Same system, same dimensions; the two recessed versions differ from each other only in how the sash looks. | Same system; the Vlak version sets the sash flush with the outer frame, this one doesn't. | K-vision Trend, from the profile system of profine, the group behind Kömmerling (Kommerling): also recessed and 120 mm deep, with Uf 1.2 W/m²K against 1.1 and a 130 mm sightline against 140. |
Side by side, true to scale
The same scale for all three, so what looks deeper here is deeper.
Where does the LivIng Verdiept 6 fit?
New build
Suitable, and with this insulation value one of the better uPVC profiles we supply.
Renovation
Suitable.
Listed buildings and conservation areas
Check with your local planning authority first; on a listed building or in a conservation area, uPVC is approved less readily than aluminium or timber.
Standards and Building Regulations in the UK
We supply, we don't install, so fitting is your installer's work. In the Netherlands, where we are based, two industry guidelines sit side by side: the VKG fitting guidelines for uPVC windows and doors, and the KVT for joinery. Both come down to the same thing, and so does good practice anywhere: the opening must allow an airtight, watertight, flat and square joint, and the loads on the window must be carried through fixings — and a sub-frame, where one is used — into the structure.
Every window placed on the market in the EU carries CE marking to EN 14351-1: with it the manufacturer declares, on its own authority, that the product meets the essential characteristics in that standard, such as thermal transmittance, air permeability and resistance to wind load. It is a legal obligation, not a test by an independent body — and it is not a UK certification scheme, so we don't present it as one.
In England, Approved Document L sets the limit for replacement windows in an existing home at a U-value of 1.4 W/m²K or WER band B; for doors it is 1.4 W/m²K or DSER band C (more than 60% glazed) or DSER band D (other doors), and a replacement may not perform worse than what it replaces. That U-value is for the whole window (Uw). The Uf on this page is the frame profile alone, so on its own it doesn't tell you whether a window complies; the Uw of your window is stated in your offer. Replacing windows is notifiable building work in England and Wales: an installer registered with a competent person scheme, such as FENSA or Certass, notifies it, or you notify building control before work starts. Because we don't install, that sits with your installer. Scotland and Northern Ireland have their own rules. We don't give Building Regulations advice — check with your installer or building control.
Documents: data sheet
- Rovenzia data sheetPDF · 2 kB
- Rovenzia data sheet Schüco LivIng Verdiept 6 (PDF)not yet available
Made-to-measure quote
Configure and request a quote
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Questions about the Schüco LivIng Verdiept 6
Can you deliver this profile to me in the UK?
We are a Dutch supplier and deliver to the Netherlands, Belgium, Germany and France. Delivery to the UK is quoted with your offer. Production time for Schüco LivIng Verdiept 6 is 6 to 8 weeks. You enter your postcode with your quote request. For this profile in any case: there is no automatic price yet, so your request always goes to the manufacturer for a made-to-measure quote.
What sizes can I order?
Schüco's system manual gives the frame depth (120 mm) and the glass thickness (24 to 52 mm) for this system, but no maximum size for a combined unit — so that is not known yet. Once the profile is in our database with a maximum size, the configurator enforces that limit itself; until then we check a request by hand.
What is the lead time?
Production time is 6 to 8 weeks, the same for all our suppliers (our figure as of 15 September 2026). Delivery to the UK is quoted with your offer. The quote itself is quicker: you'll hear from us within three working days of your request; if it takes longer, you'll hear that within the same three working days, with the date it will be ready.
What exactly will arrive?
What you put together in the configurator is what arrives: the profile you chose, in your size and layout, with the glass and colour you picked. The summary — the last step before your request goes out — lists line by line what your configuration contains, and anything not listed there doesn't come with it. So you know before you unpack, not after. How and where it is delivered in the UK is set out in your offer.
Do you install it as well?
No. We supply, we don't install. That has one consequence you need to know: in England and Wales, replacing windows is **notifiable building work** under the Building Regulations. An installer registered with a competent person scheme, such as FENSA or Certass, notifies it; otherwise you notify building control before work starts. What we don't do is give Building Regulations advice — check with your installer or building control what applies in your situation.
Which glass and colours can I choose?
We offer six types of glass: HR++ double glazing (Ug 1.1), triple glazing (Ug 0.6), satin obscure glass in double and triple, and laminated safety glass class P4A in double (Ug 1.0) and triple (Ug 0.6). For colour there are through-coloured uPVC, dark and other foils for uPVC, and smooth or textured powder coating in a RAL colour for aluminium. Which combination is available on this profile is shown by the configurator — it refuses a combination that doesn't exist rather than quietly supplying it.
Can I send it back if I don't like it?
No. A window made to your measurements is made to order, and made-to-order goods fall outside the right to cancel. We say so before you order, not in the small print. In return, we take the risk out at the start: a measurement guarantee, a sample pack so you can see the colour in your own light, and a fixed procedure if anything is broken on delivery.
What if something is damaged on delivery?
Check it with the driver before you sign, and have any damage noted on the delivery note. Until the window is in your hands, damage in transit is **our risk**, not yours — we ship on DAP terms, so the risk stays with us until delivery. If you still find visible damage when you unpack, report it with photos **within two working days of delivery**. What you can't see on delivery isn't covered by that: for hidden defects your statutory rights apply unchanged.
Configure your window or door in Schüco LivIng Verdiept 6
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request my quote