Aluminium flush sash windows
A flush sash window has its opening sash sitting level with the outer frame when it is closed, like a traditional timber casement. We say it plainly: we don't make the British flush casement, in aluminium or in uPVC. What we do make are aluminium and uPVC windows with a flat face that open inwards. This page explains the difference, so you can judge whether one of them does what you want.
What a flush sash window is
On a standard British casement the sash sits on the face of the frame, so when it is closed you see a step: the sash stands proud of the frame around it. On a flush sash window, also called a flush casement, the sash closes into the frame and finishes level with it. From outside the window reads as one flat surface, which is how timber casements on older houses looked. That is why flush sash windows are asked for on period houses and in conservation areas.
The British flush casement opens outwards, side-hung or top-hung, like most British casements. In aluminium it is made on dedicated flush systems. In searches you will also see "aluminium sash windows": that usually means vertical sliding sash, a different window again.
What we don't make
We don't supply outward-opening windows, so we don't supply the British flush casement, and we don't supply sliding sash windows either. Every sash we make opens inwards. If a flush casement that opens out is a requirement, for example a planning condition on a listed building, a British fabricator of flush systems is the right route.
A flat face in aluminium: Hidden Vent
In the Hidden Vent style of the Reynaers ConceptSystem 77, the opening sash disappears completely behind the outer frame. From outside you see only the frame, with no sash profile inside it and no step: an opening window and a fixed one look almost the same. The ConceptSystem 77 shows 89 mm of frame and sash together on an inward-opening window, the slimmest in our range. The Reynaers MasterLine 8 also has a Hidden Vent style, on a 77 mm outer frame.
It is not a flush sash in the British sense, because the sash is hidden behind the frame rather than set level with it. But if what you are after is a calm, even face on a modern elevation, it achieves that, and it opens inwards.
Fixed panes that match the opening ones
Much of the flat, regular look of a flush casement elevation comes from fixed and opening panes looking alike. With a fixed sash, the fixed pane gets the same sash frame as the opening one beside it, without hardware. On a window of several panes you then see the same profile everywhere, whichever pane opens.
Flush in uPVC: three profiles
If the material is open, our uPVC range has three flush profiles, where sash and frame sit in one plane: the Aluplast Ideal 4000 at 70 mm frame depth, the K-Vision Classic at 76 mm and the Schüco LivIng Flush at 82 mm. All three are tilt and turn windows that open inwards; the LivIng Vlak page says the same thing this page does, that it is not a British flush casement. Each has its own profile page.
Flush casement or inward tilt and turn: the practical difference
An outward flush casement keeps the room clear when it is open and leaves the sill free for plants or blinds. An inward tilt and turn is cleaned from inside, both faces of the glass, and can stay tilted for air while you are out of the room. It needs room inside to turn open, so check what stands in front of each window before you replace outward-opening windows with inward ones.
Heritage look: what else helps
On a period house the glazing pattern counts as much as the profile. Wiener bars are glazing bars fixed to both faces of the glass, with a spacer bar in the cavity between them; that comes closest to a true divided pane. Colour does the rest: aluminium is powder coated in any RAL colour, so a heritage green, cream or black is matched exactly, and the inside can be a different colour.
In a conservation area or on a listed building, the local planning authority decides what is accepted, and an inward-opening window may not be. Check with them before you order.
Insulation and Part L
Uf is the heat loss through the profile, Ug through the glass: Ug 1.1 for double glazing, Ug 0.6 for triple. In England a replacement window has to reach a whole-window U-value of 1.4 W/m²K or Window Energy Rating band B, and may not perform worse than the window it replaces. The Uw of your window is in your quote. Replacing windows in England and Wales is notifiable building work: we supply, we don't install, so your installer notifies it through a competent person scheme such as FENSA or Certass, or you notify building control first.
Ordering
Put the window together in the configurator, pane by pane, and send it as a request. Within three working days you have the quote. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.
Frequently asked questions
Do you make aluminium flush sash windows?
Not the British flush casement, which opens outwards. We make aluminium windows with a flat face that open inwards, such as the Reynaers ConceptSystem 77 in its Hidden Vent style.
Is a flush sash window the same as a flush casement?
Yes, in most UK usage: a casement whose sash closes level with the frame. It is not a sliding sash window.
What is the difference between flush and standard casement windows?
On a standard casement the sash stands proud of the frame when closed; on a flush casement it sits level with it.
Do you have flush windows in uPVC?
Yes: the Aluplast Ideal 4000, the K-Vision Classic and the Schüco LivIng Flush, with sash and frame in one plane. All three are tilt and turn and open inwards.
Can a flush window open inwards?
Our flush and Hidden Vent windows do. The British flush casement opens outwards, and that one we don't supply.
Are aluminium flush windows suitable for a conservation area?
Your local planning authority decides. Ask them before you order, and mention that our windows open inwards.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote