External doors made to measure, with frame
An external door made to measure, always with its frame: front door, back door or French doors, in uPVC or aluminium and supplied as one unit. Six layouts, with or without a side panel, opening inwards or outwards.
6 configurations, each with its own page
Configure your doorsChoose your layout
Each configuration has its own page with the standard size, the profiles that can do it and a direct way into the configurator.
One door, no side panel — the narrowest way to give a house its own entrance.
Request my quoteFixed glass to the left of the door — more light in the hall, without a wider door.
Request my quoteFixed glass to the right of the door — more light in the hall, without a wider door.
Request my quoteA side panel either side of the door — the widest, most symmetrical entrance.
Request my quoteFully glazed and opening outwards — a single door onto the patio or garden.
Request my quoteTwo doors opening outwards — a wide, clear way through without a track.
Request my quoteWhat you need to know about made-to-measure doors
The first distinction with a door isn't the side panel but the opening direction. A front door opens inwards; what opens outwards we call a back door or garden door, and it's the same door leaf with the hinges reversed. Behind that choice is the way you walk through: with a front door the hall is usually smaller than the space outside, with a garden door it's the other way round.
A side panel is fixed glass next to the door, not a second door — it adds light without making the door itself wider or heavier to use. A single side panel can go left or right, usually on the side with the most room in the wall or the walkway; two side panels give a symmetrical look and the most light in the hall, at the cost of the widest opening of the three.
If you want a wider way through than one door allows, double garden doors are the form for it: two doors that open outwards from the middle, so the whole width can clear without tracks or folding hardware. That's narrower than a sliding patio door or a bifold door, but simpler and usually cheaper if you don't need their full width.
Which external door suits your opening?
An external door is any door in the outside wall: the front door to the street, the back door to the garden and the double doors to the patio. We make all three to measure and always with the frame. The table sets the six layouts side by side with their starting size; you adjust that size to your own opening in the configurator.
| Layout | Opens | Starting size (w × h) | Where you see it |
|---|---|---|---|
| Front door | inwards | 1,000 × 2,100 mm | entrance with no glass beside it |
| Front door with side panel left | inwards | 1,450 × 2,100 mm | hall that needs more daylight |
| Front door with side panel right | inwards | 1,450 × 2,100 mm | the same, with the glass on the other side |
| Front door with two side panels | inwards | 1,850 × 2,100 mm | wide, symmetrical entrance |
| Back door or patio door | outwards | 1,000 × 2,100 mm | kitchen or utility room to the garden |
| French doors | outwards, from the middle | 1,600 × 2,200 mm | living room to the patio |
External doors with frame: what's in the unit
You don't buy a loose door from us but an external door with its frame: outer frame, door leaf, threshold, hardware and cylinder as one unit, made to the outside size you give. A front door has a quartz composite panel from Dindecor; you choose the door design, the glass and the colour yourself. Because leaf and frame are made together, nothing has to be trimmed or planed on site.
We don't hang a new door in an existing frame. If your old frame is still sound and you only want a different door leaf, a joiner is the person to ask. If the frame is draughty, has moved or you want better insulation, a complete new unit solves that in one go.
uPVC or aluminium external doors
A uPVC external door never needs painting: the colour is in the material or in a foil. The profile insulates well on its own; on the Gealan S 9000 that is Uf 1.10 W/m²K. At door size, uPVC is usually the cheaper of the two materials — the usual choice for uPVC back doors.
You go for aluminium for a slimmer profile and a free choice of RAL colour, with the gloss level. Which profiles are available for each layout is shown on that layout's page and in the configurator. On a front door you mainly see the difference in material in the frame round the door, not in the door itself.
How well an external door insulates
On a door most heat is lost through the glass and through the joint at the bottom, not through the profile. If you choose a lot of glass, take triple glazing: Ug 0.6 W/m²K against 1.1 for HR++ double glazing. So how much glass you put in the door also decides how warm the hall or kitchen stays.
At the threshold, look at the difference between the floor level inside and outside. That step decides how the threshold is finished and whether a draught can get underneath. Agree it with whoever fits the door before you order.
How secure is an external door?
An external door is the first thing a burglar looks at, and a back door out of sight of the street even sooner. In the configurator you choose a cylinder or the heavier class C security cylinder, and for glass within reach of the lock P4A laminated safety glass, which stays on its interlayer when struck.
A security class such as RC2 belongs to the complete unit: frame, leaf, hardware and the way it is fixed into the wall. That's why we don't put a class per profile on the page. If you need one for insurance or a specification, ask before you order.
Ordering an external door made to measure
You order on the outside size of the frame, not on the structural opening. Measure the opening at three heights and three widths, take the smallest figure, and allow for the fitting tolerance your installer needs. A door section with us is at least 600 mm wide and at most 2,500 mm tall.
We make every unit to within ±2 mm up to one metre and ±3 mm above that, and check it before it is shipped. How to measure an opening is explained step by step on the page about measuring for windows and doors.
From configurator to delivery
You choose the layout, the material and the profile, the door design, the glass and the colour, and request the offer. Within three working days you have the price for your sizes. Production time is 6 to 8 weeks, and delivery to the UK is quoted with your offer.
We supply, we don't install. Your own installer fits the door, removes the old one and notifies the work through a competent person scheme such as FENSA or Certass, or you notify building control before work starts.
uPVC or aluminium?
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Frequently asked questions about doors
What's the difference between a front door and a back door?
The opening direction: a front door opens inwards, a back door or garden door outwards. Otherwise it's the same form of door, often with more glass on a garden door, because the view is usually the point there.
What does a side panel do to the price of a door?
A side panel is fixed glass and needs no hinge or hardware, but it does add to the length of frame and the glass. The exact difference is in your offer, once you've chosen a door with or without a side panel and sent the request.
Can I get a wide opening with two doors, without a sliding door?
Yes, double garden doors: two doors that open outwards from the middle. That needs room outside for them to swing, and in return gives an opening without tracks or folding hardware.
What are uPVC doors made of?
The frame and the leaf are uPVC profile, a rigid plastic with a reinforcing core inside: steel in most profiles, glass fibre in some. On our front doors the leaf carries a quartz composite panel by Dindecor; garden and back doors carry mostly glass.
How long do uPVC doors last?
We don't publish a lifespan in years, because we can't show you a measurement behind it. What shortens the life of any door most is the fitting and the hardware adjustment, which is your fitter's work.
How safe are uPVC doors?
As safe as the complete unit and its fitting. Every front door comes with a cylinder and three keys, a class C security cylinder is an option, and laminated safety glass class P4A (EN 356) can be chosen. We supply and don't install, so we make no claim on the class a door reaches once fitted.
Can I buy uPVC doors online, supply only?
Yes, that is how we work. You configure the door online, made to measure, and request the offer; we supply, we don't install. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery. Delivery to the UK is quoted with your offer.
What is an external door?
Any door in the outside wall: the front door, the back door and the garden or patio doors. An internal door sits between two rooms and doesn't have to stand up to rain, wind or break-ins; an external door does. That's why an external door from us always comes with frame, threshold and insulating glass. Our front doors have a uPVC or aluminium frame with a quartz composite panel, so the choice you make is the frame material: uPVC for price, aluminium for a slimmer, stiffer frame.
How wide is an external door?
A single external door starts with us at 1,000 mm wide and 2,100 mm tall, but you adjust that size to your opening. The narrowest door section is 600 mm, the tallest 2,500 mm. With one or two side panels the unit gets wider, the door itself doesn't.
Does an external door open inwards or outwards?
With us a front door opens inwards; a back door, patio door or French doors open outwards, so the leaf takes up no room inside. If you want it the other way round, put it in the notes with your quote request.
Which external door insulates best?
A door with triple glazing in a well-insulating profile. On a door with a lot of glass, the glass counts most: triple reaches a Ug of 0.6 W/m²K, HR++ double glazing 1.1. The Uf of each profile is on its profile page; for Part L it is the U-value of the whole door that counts, and that is in your offer.
Can you install the external door as well?
No, in the UK we supply, we don't install. Your own installer fits the door, removes the old one and notifies the work through a competent person scheme such as FENSA or Certass, or you notify building control.
What is the lead time for a made-to-measure external door?
You have the offer with the price for your sizes within three working days. After you order, production time is 6 to 8 weeks; delivery to the UK is quoted with your offer.
Also made to measure
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote