Skip to content
Made to measure to the millimetre Reply within one working day Delivery to the UK, quoted with your offer Size guarantee on every window and door
Rovenzia
Home/Aluminium windows made to measure/Aluminium casement windows
Aluminium windows

Aluminium casement windows

In the UK a casement window usually opens outwards. Ours don't: every aluminium casement we supply opens inwards, as a side-hung window, a tilt and turn or a French casement. This page explains what that means in daily use, which aluminium profiles we make them in, and what to check if you are replacing outward-opening windows.

Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered

What a casement window is

A casement is a window with a sash hinged at the side, top or bottom, as opposed to a sliding sash. The British casement is usually side-hung or top-hung and opens outwards. The casement windows used on the Continent open inwards, and they are the ones we supply: made on European aluminium systems from Aluprof and Reynaers, to the millimetre, supply only.

The inward-opening casements we make

The side-hung casement turns fully open inwards on its hinges, without a tilt position. Its standard size as a single window is 1,000 × 1,400 mm, and in a frame of two panes or more one pane can be the full-opening side-hung sash. The tilt and turn is the most versatile of them: one handle tilts the sash inwards at the top for ventilation, or turns it fully open for air and for cleaning. A hopper is hinged at the bottom and tilts inwards to one fixed gap.

The French casement has two side-hung sashes that meet in the middle without a mullion between them, so the whole width opens. Its standard size is 1,600 × 1,500 mm. Fixed panes go alongside any of these in the same frame; with a fixed sash, the fixed pane has the same sash frame as the opening one beside it and looks the same from outside.

Inward or outward: what changes

An inward-opening casement is cleaned from inside, both faces of the glass, without a ladder; that is the strongest argument for it on an upper floor. The hinges and the opening joint sit on the inside. On a tilt and turn you can leave the window tilted for air while you are out of the room.

What an inward-opening sash needs is room inside. Blinds, curtains, a deep sill with plants on it or a kitchen tap in front of the window all get in the way of a sash that turns into the room. If you are replacing outward-opening windows, walk round the house and check every window for what stands in front of it. Where something does, a tilt and turn used mostly in the tilt position, or a hopper, is often the answer.

We don't supply outward-opening casements

Some of the aluminium systems we use exist in an outward-opening version, but we don't supply it, and we don't make the British flush casement either. If an outward-opening casement is a requirement, for example on a listed building or where a planning condition asks for it, this is not the right page; a British fabricator is.

The aluminium profiles

The Aluprof MB-79N is the entry-level aluminium window: 70 mm frame depth, a 128 mm sightline, Uf 0.83 W/m²K and windows up to 5,000 × 2,700 mm. The Aluprof MB-86N insulates best of all our profiles, uPVC included: 77 mm frame depth, a 122 mm sightline, Uf 0.57 W/m²K, up to 6,000 × 3,000 mm. The Aluprof MB-Ferroline is the steel look: 97 mm of frame and sash together, 110 mm deep, Uf 1.50 W/m²K.

From Reynaers, the MasterLine 8 has a 77 mm outer frame and an 87 mm sash, 97 mm of sightline on an inward-opening window and a Uf from 1.2 W/m²K. The ConceptSystem 77 is the slimmest, at 89 mm of frame and sash on an inward-opening window, takes glass up to 53 mm thick and is tested to burglar resistance class RC2 and RC3. Each profile has its own page with the cross-section.

Sightlines: how much frame you see

The sightline is the width of frame and sash together that you see from outside. It decides how slim the window looks, and aluminium is chosen for a casement mainly because it can be slimmer than uPVC for the same sash size. In our range it runs from 89 mm on the ConceptSystem 77 to 128 mm on the MB-79N. A slimmer profile usually insulates less: the MB-Ferroline at 97 mm has a Uf of 1.50, the MB-86N at 122 mm 0.57.

A flat face: the Hidden Vent style

In the Hidden Vent style of the ConceptSystem 77, the opening sash disappears completely behind the outer frame. From outside, an opening casement and a fixed pane then look almost the same: one flat, even face. It is the closest we come in aluminium to the calm look of a flush window, but it still opens inwards.

Insulation: Uf, Ug and the whole window

The aluminium profiles are thermally broken: an insulating zone separates the inside of the profile from the outside. Uf is the heat loss through the profile alone; the glass has its own value, Ug 1.1 for double glazing and Ug 0.6 for triple. Part L looks at the whole window, Uw, which comes from profile, glass and the ratio between them. On a slim profile with a higher Uf, the glass carries more weight in the result. The Uw of your window is in your quote.

Colours

Aluminium is powder coated, so the frame can be any RAL colour, and the inside can be a different colour from the outside: anthracite outside and white inside, for example. The hardware colour can differ from the frame, and anthracite hardware is only available on aluminium.

Handles, hinges and locks

Every window handle we supply can be locked, with a key or with a push button in the neck, so a child can't open the window and it can't be pushed open from outside. On a tilt and turn or side-hung casement you can have concealed hinges: they sit in the rebate, out of sight once the window is closed. A hopper has no hinges to hide; it tilts on a stay arm.

Glazing bars for a period look

For a divided look, Wiener bars are glazing bars fixed to both the outside and the inside of the glass, with a spacer bar in the cavity between them. That comes closest to a true divided pane while the glass stays one insulating unit.

Part L and fitting

In England, a replacement window in an existing home has to reach a U-value of 1.4 W/m²K or Window Energy Rating band B, and may not perform worse than the window it replaces. Replacing windows in England and Wales is notifiable building work. We supply, we don't install: your installer, registered with a competent person scheme such as FENSA or Certass, notifies it, or you notify building control before work starts. Scotland and Northern Ireland have their own rules.

Ordering aluminium casement windows

Put each window together in the configurator, pane by pane: fixed, tilt and turn, hopper or, from two panes, a full-opening side-hung sash. Send the request and within three working days you have the quote. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.

FAQ

Frequently asked questions

Do your aluminium casement windows open outwards?

No. Every sash we supply opens inwards: side-hung, tilt and turn, hopper or French casement. Some systems exist in an outward-opening version, but we don't supply it.

What is the slimmest aluminium casement you make?

The Reynaers ConceptSystem 77, at 89 mm of frame and sash together on an inward-opening window.

Which aluminium casement insulates best?

The Aluprof MB-86N, at Uf 0.57 W/m²K, the best-insulating profile in our whole range.

Is a tilt and turn a casement window?

Yes, an inward-opening one: hinged at the side to turn open and at the bottom to tilt, with one handle.

Can aluminium casement windows be a different colour inside?

Yes. Inside and outside each have their own RAL colour.

Do aluminium casement windows meet Building Regulations?

That depends on the whole window, frame and glass. In England a replacement window needs 1.4 W/m²K or WER band B; the Uw of your window is in the quote.

Do you fit aluminium casement windows?

No. We supply, we don't install. Your installer fits them and notifies the work.

Made-to-measure quote

Know what you want? Put it together.

No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.

Request a quote
Made-to-measure quote

Configure your window or door

Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.

Request a quote
Request a quoteSend a drawing