Front door styles and designs
394 front door designs from three brands, Dindecor, Aluprof and our own Rovenzia range, in 26 lines, in uPVC or aluminium. Most front door styles fall into four groups, and the filters below let you narrow the catalogue to the one you are after. Modern front doors have a flat panel with a clean face: stone, concrete or ceramic quartz sinter in the Stone, Concrete and Ceramics Line, milled 3D grooves in the Lineo Line, or a handle recessed into the panel in the Integro Line. Traditional and period front doors take their look from a panelled door: the Retro Line frames the panel with decorative aluminium mouldings, and the Economic Line mixes traditional and modern motifs with stainless steel inlays. Glazed front doors carry glass in the panel itself, as black glass inlays in the Glass Line, sandblasted glass with its own pattern in the Premium Line, or glass elements with a milled motif in the New Line; for more daylight in the hall, add a glazed side panel or a fanlight in the configurator. Plain, flat uPVC front door designs start with the Basic Line, the entry-level panel in PVC or foil-finished ABS, and the Fashion Line adds a laser-cut or milled pattern with a long bar handle. The Aluprof AP, AD and AG series are flat aluminium panel doors on insulated profiles, with a Uf from 0.44 W/m²K in the brochure. The panel is the door leaf itself: the infill with or without glass, and the stainless steel or the grooves that give the door its face. The frame around it, the size, the colour and the glass you choose afterwards in the configurator, with this model already filled in, and the same design works as a cottage door in a woodgrain or a heritage green as it does as a modern door in anthracite. Each model page says what marks that line out and which panels from the same line go with it. What you see is the manufacturer's own rendering, not a photo of a finished house — how the panel looks in your colour and frame you see in the summary before you send your request. Every door is made to your size within ±2 mm up to a metre and ±3 mm above, the quote follows within three working days and production takes 6 to 8 weeks once you accept. Delivery to the UK is quoted with your offer; we supply, we don't install, so fitting is up to you or your installer.
Front door designs by style
The 26 lines in this catalogue, from Dindecor, Aluprof and our own Rovenzia range, differ mainly in what sits on the panel: nothing at all, stainless steel, glass, stone or mouldings. That is where you choose the style of your front door. The table groups them by style; use the filter at the top to see only the line you are after.
| Style | What you see on the panel | Lines in this catalogue |
|---|---|---|
| Flat and minimal | Smooth panel, handle recessed or surface-mounted, no glass | Integro Line, Integro Smart, Lineo Line, AP, AD and AG series |
| Natural materials | Real natural stone, concrete or ceramic on the panel | Stone Line, Concrete Line, Ceramics Line |
| Stainless steel | Stainless steel inlays on or flush with the panel | Premium Line, Economic Line |
| Glazed | Glass elements, black glass inlays or sandblasted glass | New Line, Glass Line, Premium Line |
| Pattern or black accents | Laser-cut or milled pattern, or black inlays along the lines | Fashion Line, New Black Design |
| Traditional | Panel framed with decorative mouldings, like a panelled door | Retro Line |
| Simple uPVC | Flat panel in PVC or foil-finished ABS | Basic Line |
| Our own uPVC designs | Glass strips, round or square panes, a curved strip or a stainless steel bar | Rovenzia: Lijn, Baan, Schuin, Golf, Cirkel, Ruit, Staaf, Klassiek, Vlak |
A modern house with a clean façade usually suits a flat panel without much detail. On a period home with panelled doors or leaded lights, the framed panel of the Retro Line fits better, as does a glazed design that brings light into the hall.
Types of front door: material, glass and layout
uPVC or aluminium. The uPVC panels range from plain PVC to panels with stainless steel inlays or a laser-cut pattern. The aluminium panels go further in finish: stone, concrete, ceramic and the full RAL range. Aluprof's panel doors sit on the MB-79N, MB-86N or MB-104 Passive profiles; their brochures give a Uf from 0.44 or 0.50 W/m²K.
With or without glass. A door without glass leaves the hall dark while it is shut. If you want light without glass in the door leaf, add a side panel beside the door or a fanlight above it. Glass in the door itself lets light in; choose sandblasted glass if you would rather nobody could see in.
The layout. You pick the design separately from the layout: a single front door, a door with a side panel on the left or right, with two side panels or with a fanlight. The configurator shows which combinations work with your design. Our front doors open inwards.
From design to made-to-measure front door
Click a design and you land in the configurator with that panel already chosen. There you enter the outside frame size, the layout, the glass and the colour. A door leaf is at least 600 mm wide and at most 2,500 mm high.
Your made-to-measure quote follows within three working days; once you accept, delivery takes 6 to 8 weeks. We deliver to your door at street level; fitting is down to your own installer.
Front door designs: frequently asked questions
What types of front door are there?
By material, uPVC or aluminium; by look, flat, with stainless steel, glazed, faced with stone or concrete, or traditional with mouldings. The layout varies too: a single door, or a door with a side panel or fanlight.
Which front door suits a modern house?
A flat panel without much detail, such as the Integro Line with its recessed handle, the Lineo Line or a panel faced with concrete or ceramic.
Which front door suits a period property?
A framed panel such as the Retro Line, or a glazed design. Consider a fanlight too if the old door had one.
Can I get a front door design with glass?
Yes. The New Line has glass elements, the Glass Line black glass inlays, and the Premium Line offers sandblasted glass. In our own designs the glass forms strips, circles or squares. Use the filter to see only those lines.
Is an aluminium front door better insulated than a uPVC one?
That depends on the design. Aluprof's panel doors quote a Uf from 0.44 W/m²K. Compare front doors on the figure for the whole door in your quote, not on the material alone.
Can I order a front door design in my own colour?
Many aluminium lines come in any RAL colour; for uPVC you choose from the foils. The configurator shows which colours go with your design.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote