Stained glass front door
Stained glass is what many people picture on a period front door: coloured panes held in lead above a painted door, or a sunburst in the fanlight. We say it straight away: we don't supply stained or leaded glass. This page explains what to know about stained glass doors, how to keep an original panel, and what we make for a period front instead.
What stained glass in a door is
Traditional stained glass is made of small pieces of coloured glass joined with strips of lead, sometimes with painted detail fired into the glass. On Victorian, Edwardian and thirties houses it sits in the upper panels of the door, in the fanlight above it and in the side lights. Leaded lights use the same lead work with clear or textured glass instead of coloured.
In a modern insulated door, decorative glass is usually built into a sealed double glazed unit, so the lead work sits protected between the panes. That is how a stained glass look can sit in a door that also has to insulate. It is specialist work, and it is not something we make.
Why we don't supply it
The glass we supply in doors is clear, obscure or laminated, as double or triple glazing. We would rather tell you that here than let you find out after configuring a door. If a stained glass panel is the heart of the door you want, a specialist door maker or glazier is the better route.
Keeping an original stained glass panel
If your house still has its original stained glass, in the door or the fanlight, it is often the most valuable part of the entrance. A specialist restorer can tell you whether it can be repaired and how it can be kept. Ask that question before you replace anything: where the fanlight has its own frame above the door, it may be able to stay while the door below it is replaced. Your installer can tell you on site.
If you replace the door and keep the fanlight, tell us in the notes with your request, and give the size of the opening for the door only. We make the door to that size; the fanlight stays a separate job.
What we make for a period front instead
Much of what makes a stained glass door look right is the layout of the glass, not the colour in it: small panes at the top, a glazed upper part above a solid lower panel, narrow lights beside the door. Our Klassiek line has that layout in uPVC: Zuidwolde, Coevorden and Emmen with two, four or six small panes at the top, Echten and Odoorn with a top window above a solid panel. The Ruit line stacks square panes down the door. The line and model names are Dutch; you find them under the same names in the configurator.
For a decorative pattern in the glass itself, the aluminium Premium Line offers sandblasted glass with its own pattern, and the Glass Line carries black glass inlays as a motif on the panel. Neither is stained glass, but both put a design in the door rather than plain glass.
Colour in the door, not the glass
A period door gets most of its colour from the paintwork. In uPVC the deep traditional colours are fir green RAL 6009, leaf green RAL 6002 and wine red RAL 3005; on aluminium any RAL colour is possible. With a cream or white frame and a deep-coloured leaf, plus small panes of obscure glass at the top, you get much of the effect of a stained glass door without the stained glass.
Privacy: obscure glass instead of coloured glass
Part of the appeal of stained glass in a front door was always privacy: light comes in, nobody sees into the hall. Satin obscure glass does the same job. It lets light in and stops people seeing in, in the door as well as in a side panel. Make sure the door and the side panel have the same glass, or the difference shows at once.
Security and safety glass
A burglar looks for the pane they can break to reach the handle. Where glass sits close to the lock, choose laminated glass: if it breaks, the interlayer holds it together. That applies whatever the glass looks like, stained or plain.
Side panels and the fanlight
Stained glass was often in the narrow lights beside the door. A side panel from us can be as narrow as 180 mm, on the left, the right or both sides, in clear or obscure glass. A fanlight above the door goes in the notes with your request, and we look at what fits.
Part L and fitting
In England, a replacement door with 60% glass or less has to reach a U-value of 1.4 W/m²K or Door Set Energy Rating band D; with more than 60% glass, 1.4 or band C. That limit applies to the whole door, decorative glass included. We supply, we don't install: your installer fits the door and notifies the work through a competent person scheme such as FENSA or Certass, or you tell building control first.
Ordering a period-style door from us
Put the door together in the configurator: layout, design, colour, glass and options. Send it as a request and within three working days you have the quote. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.
Frequently asked questions
Do you sell front doors with stained glass?
No. We supply clear, obscure and laminated glass, not stained or leaded glass. For a stained glass door, a specialist door maker or glazier is the better route.
Can I keep my original stained glass fanlight?
Where the fanlight has its own frame, it may be able to stay; your installer can tell you. Then give us the size of the door opening only and mention the fanlight in your request.
Is stained glass in a front door secure?
Security depends on the glass type and the lock, not the decoration. Where glass sits near the lock, laminated glass is the safer choice.
What gives privacy like stained glass?
Satin obscure glass: light comes in, nobody sees in.
Which of your doors suits a house that had stained glass?
The Klassiek line, with small panes or a top window above a solid panel, in a deep colour such as fir green or wine red.
Can I have patterned glass in the door?
On aluminium doors, the Premium Line has sandblasted glass with its own pattern. Stained or leaded glass we don't supply.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote