Skip to content
Made to measure to the millimetre Reply within one working day Delivery to the UK, quoted with your offer Size guarantee on every window and door
Rovenzia
Home/uPVC front doors with frame, made to measure/1930s front door, made to measure
Style

1930s front door, made to measure

A 1930s front door has a glazed upper part, often divided into small panes, above a solid lower half. In our uPVC range the Klassiek and Ruit designs come closest to that look, made to the size of your opening, with side panels if your porch has them.

Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered

What a 1930s front door looks like

Doors on houses of the twenties and thirties share a few traits. The glass sits in the upper third or so of the door, with a solid lower part below a raised mid-rail, often with vertical panels. The glass is divided: small square panes, a row of narrow lights, or a single top window. Many thirties semis have the door set back in a porch with an arched opening, and a narrow side light beside the door.

The details people remember most, the sunburst and the stained or leaded glass, are decoration on top of that layout. A new door that gets the layout right reads as a thirties door even without them; one that copies the decoration but gets the layout wrong doesn't.

The designs that come closest

Our Klassiek line has eight uPVC door designs. Zuidwolde, Coevorden and Emmen have two, four or six small panes at the top above a solid panel: the closest to a 1930s door. Echten has one top window above a solid panel, a quieter version of the same idea. Gieten has a wide window at the top with a small window below it, and Odoorn one tall window above a solid lower panel.

The Ruit line gives the other thirties look: three, four or five square panes one above the other in Schie, Vliet and Spaarne, or four panes in a two-by-two block in Zaan. Square panes stacked down the door are a pattern you see on many thirties terraces. If you are unsure, put a photo of an original door in your street next to these designs and pick the layout that matches.

What we don't make

None of our designs is a sunburst, and we don't supply stained or leaded glass: the glass we supply is clear, obscure or laminated. We don't make timber doors either. If an original sunburst door or a leaded light is what you want to keep, a specialist restorer is the better route. If you want the layout and the proportions of a thirties door in a frame that needs no painting, that is what we can make.

Side panels and the porch

Many thirties porches have a narrow light beside the door. You can have a fixed side panel on the left, on the right or on both sides, and it can be as narrow as 180 mm. With the side panel in obscure glass the hall gets light without being seen into from the path.

In a recessed porch the door often sits in an opening that is not quite square after ninety years. That is a reason to measure carefully: the width at the top, middle and bottom, the height on both sides, and use the smallest. A door section is at least 600 mm wide and goes up to 2,500 mm high; above that, a fanlight or another section is added. If your porch has a fanlight over the door, mention it in your request.

Colours for a thirties house

Thirties fronts are mostly red brick or render with a tiled roof, and the doors were often painted dark green, red or cream, or left in a stained wood tone. In our uPVC colours that becomes fir green RAL 6009, leaf green RAL 6002, wine red RAL 3005, cream (coloured through or as a grained foil), or a wood tone such as Golden oak, Walnut or Mahogany. White and anthracite grey suit a thirties house that has already been modernised.

The door leaf can have a different colour from the frame. A dark green door in a cream frame is one of the most common combinations on a thirties front and one setting in the configurator.

Square corners, like a timber door

A standard uPVC frame is welded at 45° in the corners, so you see a diagonal seam. On a 1930s house, where the original door and frame were timber, a square joint welded at 90° is the detail that makes the most difference close up. It costs more because it takes more work in the factory, and usually only the outside gets it.

Handle, letter plate and threshold

A thirties door had a knob or a short lever, not a long pull bar. Choose a short handle or a lever on a long backplate, in gold or black for a traditional look; silver reads more modern. Every lockable handle carries SKG 2 stars, a Dutch rating for the hardware.

Under the door you choose a threshold of 55 or 35 mm, in black or grey. Thirties houses often have a step up to the front door, so measure how much room there is under the door before you choose.

Conservation areas

Some thirties estates are in conservation areas. There your local planning authority decides whether a uPVC door is acceptable, and the answer often depends on the layout and colour. Ask before you order: we supply what you order and can't judge that for you.

Part L, fitting and ordering

In England a replacement front door with 60% glass or less has to reach a U-value of 1.4 W/m²K or Door Set Energy Rating band D. That is the whole door; its U-value is in your offer. We supply, we don't install: your installer fits the door and notifies the work through a competent person scheme such as FENSA or Certass, or you tell building control first.

Put the door together in the configurator and send it as a request. Within three working days you get a quote for your size. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.

FAQ

Frequently asked questions

Which door design looks most like a 1930s front door?

Zuidwolde, Coevorden and Emmen from the Klassiek line, with two, four or six small panes at the top. From the Ruit line, Schie, Vliet and Spaarne with stacked squares.

Do you make a 1930s sunburst front door?

No. None of our designs is a sunburst, and we don't supply stained or leaded glass.

Can I get a 1930s style front door in uPVC?

Yes. The designs above are uPVC, made to your size, with a square corner joint if you want the frame to look closer to timber.

What colour was a 1930s front door?

Often dark green, red, cream or a stained wood tone. We make those as RAL 6009, RAL 6002, RAL 3005, cream and wood-tone foils.

Can I have a side light like the original porch?

Yes, a fixed side panel on one or both sides of the door, from 180 mm wide.

Do I need permission to change a 1930s front door?

Your local planning authority decides that. On a listed building or in a conservation area, check with them before you order.

Made-to-measure quote

Know what you want? Put it together.

No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.

Request a quote
Made-to-measure quote

Configure your window or door

Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.

Request a quote
Request a quoteSend a drawing