Skip to content
Made to measure to the millimetre Reply within one working day Delivery to the UK, quoted with your offer Size guarantee on every window and door
Rovenzia
Home/uPVC front doors with frame, made to measure/uPVC front door, made to measure
Front doors

uPVC front door, made to measure

A uPVC front door from us is made to the size of your opening, with the frame, the leaf, the threshold, the hardware and the cylinder as one unit. You choose the layout, the door design, the colour and the options in the configurator, and get a quote within three working days.

Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered

What you get with a uPVC front door

Not a door leaf to hang in your old frame, but a complete door set: uPVC outer frame, uPVC leaf with the door panel in it, threshold, hinges, lock and cylinder. The profile has a sightline of 119 mm. Your installer takes out the old door and frame and fits the new one as a unit, which is how a door seals and locks the way it was designed to.

uPVC front door layouts

The single front door opens inwards and has no side panel. Its standard size is 1,000 × 2,100 mm, and it is the narrowest and simplest layout: right for a terraced house or a flat where there is no room for anything wider.

With a side panel on the left or on the right, the standard size is 1,450 × 2,100 mm: the same 1,000 mm door with a fixed glazed panel of 450 mm beside it. That panel doesn't open; it lights the hall. If you want light on both sides, there is a layout with side panels left and right. A side panel can be as narrow as 180 mm.

A back door uses the same construction but opens outwards, usually with more glass. Front and back door can be ordered in one request, in the same colour.

Sizes: what a uPVC door can be

The standard sizes are only a starting point; you enter your own. A door section is at least 600 mm wide and goes up to 2,500 mm high. Those are manufacturing limits, and the configurator checks them. If your opening is taller, a fanlight or another section goes above the door.

You order on the overall size of the frame, not the brick opening. Measure the width at the top, in the middle and at the bottom and the height on both sides, take the smallest figure and subtract the fitting gap your installer wants. We make the door within ±3 mm on width and height, with no more than 2 mm between the diagonals.

Door designs

Among the designs in the configurator are our own uPVC door designs: nine lines of eight. Klassiek is the traditional line, with a glazed top above a solid panel or two, four or six small panes at the top. Ruit has square panes one above the other or in a block. Lijn has vertical glazed strips, Baan horizontal bands, Cirkel round panes, Schuin diagonal strips and Golf curved strips and arches. Staaf combines glass with stainless steel bars, and Vlak is the plain line, from fully solid to a single small vision panel.

The design decides how much daylight the hall gets through the leaf itself. If you want more light without a heavier leaf, a side panel does the same beside the door.

Colours for a uPVC front door

White is the colour of the material itself. For other colours there are foils, smooth or with a grain you can feel, and cream comes both coloured through and as a foil. Anthracite grey suits a modern front; dark green such as RAL 6009 fir green, wine red RAL 3005 and wood tones such as Golden oak or Walnut suit an older one. The leaf can have a different colour from the frame, so a red door in a cream frame is one setting in the configurator. The configurator doesn't show one colour as dearer than another; what yours costs is in your quote.

Square corners

A standard uPVC frame is welded at 45° in the corners, so you see a diagonal seam. With a square joint the corner is welded at 90°, as on a timber door frame. It takes more work in the factory and costs more, but on a period house it is often the detail that makes a uPVC door look less like uPVC. Usually only the outside gets the square corner.

Threshold

Under the door you choose a threshold of 55 or 35 mm, in black or grey, or a low threshold you can step across without a step up. The threshold is where water, draughts and accessibility all meet, so settle it with your installer before you order, especially where the door sits above a step.

Locks, cylinder and handles

Every door comes with a cylinder and keys. If you are replacing more than one door, all cylinders in your order can run on the same key. In the options step there is also a class C security cylinder, with snap protection and anti-drill pins; the manufacturer's data sheet says exactly what that class means.

A cylinder protects the lock, not the whole door. A burglar-resistance class belongs to the complete door set as fitted, including the fixing into the wall, and because we supply without fitting we can't give one for the fitted door. Every lockable handle carries SKG 2 stars, a Dutch rating for the hardware. For a classic look, choose a short handle or a lever on a long backplate; for a modern front, a pull bar.

Glass in a uPVC front door

Glass in the door or the side panel comes as double or triple insulating glass, clear or obscure, and as P4A laminated safety glass, which holds together if it is struck. For a hall that faces the street, obscure glass gives light without being looked into.

Part L and fitting

In England, a replacement door with 60% glass or less has to reach a U-value of 1.4 W/m²K or Door Set Energy Rating band D; with more than 60% glass, 1.4 or band C. That is the whole door, not the panel or the frame alone, and the U-value of your door is in your offer. We supply, we don't install: your installer fits the door and notifies the work through a competent person scheme such as FENSA or Certass, or you tell building control first. Scotland and Northern Ireland have their own rules.

uPVC or aluminium front door

uPVC is the lower-cost frame for a front door, for the same reasons it is for a window. If you want a slimmer sightline or any RAL colour, or the door is heavy and used all day, look at the aluminium front door. If you are weighing uPVC against composite doors, our comparison page sets out the difference.

Ordering a uPVC front door

Put the door together in the configurator and send it as a request. Within three working days you hear from us with the quote for your size. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery. A door made to your measurements falls outside the right to cancel, which we tell you before you order. Check it with the driver before you sign and report any visible damage within two working days.

FAQ

Frequently asked questions

Do uPVC front doors come with a frame?

Yes. Frame, leaf, threshold, hardware and cylinder come as one door set, made to your size.

What size is a standard uPVC front door?

Our single front door starts at 1,000 × 2,100 mm and with a side panel at 1,450 × 2,100 mm, but you enter your own size: from 600 mm wide up to 2,500 mm high.

Does a uPVC front door open in or out?

Our front doors open inwards. A back door opens outwards and is a separate layout.

Can I have a uPVC front door with side panels?

Yes, on the left, the right or both sides. A side panel is fixed glass and can be as narrow as 180 mm.

Can the door be a different colour from the frame?

Yes. By default the leaf follows the frame; choose another colour for the door and only the leaf gets it.

Is a pvc front door the same as a uPVC front door?

Yes. uPVC is unplasticised PVC, the rigid kind used for window and door frames; "PVC door" is the shorter name for the same thing.

Do you fit uPVC front doors?

No. We supply, we don't install. Your installer fits the door and handles the Building Regulations notification.

Made-to-measure quote

Know what you want? Put it together.

No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.

Request a quote
Made-to-measure quote

Configure your window or door

Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.

Request a quote
Request a quoteSend a drawing