Front door colours: how to choose
The right front door colour depends less on fashion than on the house around it: the brick or render, the windows, the roof and the street. This guide goes through how to choose, and which of the colours we make front doors in suit which kind of house.
Start with the house, not the door
A front door is seen against everything around it. Before you look at swatches, stand across the street and note what is fixed: the colour of the brick or render, the window frames, the roof tiles, the gutters and fascias, the pointing, the colour of the neighbours' doors. A door colour that works with two or three of those looks calm; one that ignores them looks like it was chosen on a screen.
A practical way to do it: take a photo of the front of your house, hold it next to the colour swatches in the configurator, and pick the colour that goes with whatever catches the eye most. If you are torn between two dark shades, pick the lighter of the two: across a whole door leaf a colour looks darker than on a small square on a screen.
Colours by the age of the house
Victorian and Edwardian terraces were built with deep, saturated door colours: dark green, deep red, navy and black, often with brass or black ironmongery. In our range those are fir green RAL 6009, wine red RAL 3005 and black RAL 9005; for blue, the uPVC chart has brilliant blue RAL 5007, and on aluminium any RAL blue, navy included, is possible.
Thirties semis often had dark green, red or cream doors, or wood left in a stained tone. In uPVC that becomes fir green RAL 6009, leaf green RAL 6002, wine red RAL 3005, cream, or a woodgrain foil such as Golden oak, Walnut or Mahogany.
Modern and new-build homes lean to anthracite grey and black, the colours most chosen on modern fronts, often with a white inside. Flame red RAL 3000 or pigeon blue RAL 5014 is the choice for a modern door that should stand out.
Colours by brick, stone and render
Red brick takes greens, blues, cream and black well, and white gives the classic contrast. Against yellow or buff brick, deep blue, dark green or a woodgrain tone looks warmer than grey. Pale stone suits muted greens, deep red and black. On white or light render almost any strong colour works; that is where a bold door has the most effect, and where a white door can disappear into the wall.
Match the windows, or contrast on purpose
The door frame usually looks best in the colour of the windows. The door leaf is where you can contrast: in the configurator the leaf follows the frame by default, and you can give it its own colour. A white frame with a dark green leaf, or an anthracite frame with a red one, keeps the house consistent and still gives the door its own colour.
If your windows are brown woodgrain, a matching woodgrain door gives a calm front; cream or dark green gives a contrast that still belongs. Keep the door frame in the window colour either way.
The colours we make front doors in
The uPVC colour chart has thirty-five colours. White and cream are base colours, the colour of the profile itself; every other colour is a foil applied at the factory. Besides white and cream it holds greys and anthracite, three blacks (jet black matt, black RAL 9005 smooth and graphite black RAL 9011), brilliant blue RAL 5007, pigeon blue RAL 5014, leaf green RAL 6002, fir green RAL 6009, wine red RAL 3005 and flame red RAL 3000, woodgrain foils from Golden oak to Walnut and Winchester oak, and three metallic shades: silver, champagne and bronze.
On aluminium there is no chart: the frame is powder coated in any RAL colour. Black and anthracite are the colours most asked for on aluminium front doors, but a deep colour such as fir green or wine red gives a traditional door the strength of an aluminium frame.
Two colours: outside and inside
Frame and leaf each have one colour for outside and one for inside. A strong colour on the street side doesn't have to come into the hall: white or a light shade inside keeps a narrow hallway light. The drawing in the configurator turns to face the hall when you choose the inside colour, so you can see both sides.
Dark colours in full sun
A dark door leaf absorbs more heat in direct sun than a light one. If your door faces south or west without shade, a mid-tone such as anthracite, a woodgrain or a green may suit better than the deepest black. That is a judgement for the eye, not a rule.
The handle, letter plate and threshold
The handle colour changes how a door colour reads close up. On a uPVC door you choose black, white, cream, grey, silver, titanium or gold; anthracite hardware is only available on aluminium. Gold and black suit traditional colours, silver and titanium look more modern. Brass or gold looks warm with green, red or woodgrain; stainless steel suits grey and black.
Under the door the threshold is black or grey. On a dark door a black threshold disappears; on a light one, check both in the drawing.
Trends or a colour for twenty years
A door is not repainted every few years like a timber one: a foil or powder coat stays the colour you ordered. That is a reason to choose a colour you will still like when the trend has moved on. Anthracite, black, deep green and navy have been on front doors for a long time; a fashion shade is better on the things you can change easily, such as planters and the letter plate.
Conservation areas and listed buildings
In a conservation area or on a listed building, the local planning authority may have a say in the colour and the material of a front door. Check with them before you order; we supply what you order and can't judge that for you.
Seeing the colour before you order
A colour on a screen is never quite the colour in daylight. Look at it at different times of day if you can, and ask us whether a sample can be sent to you in the UK. Then put the door together in the configurator and send it as a request: within three working days you have your quote. Production time is 6 to 8 weeks; delivery to the UK is quoted with your offer. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.
Frequently asked questions
What is the most popular front door colour?
On modern homes, anthracite grey and black are the colours most chosen, and on our aluminium doors black and anthracite are the most asked for. On period houses, deep green, red and navy remain the classic choices.
What colour front door goes with red brick?
Greens, blues, cream and black, with white as the classic contrast. Keep the door frame in the colour of the windows.
What colour front door suits a Victorian house?
Deep colours: fir green RAL 6009, wine red RAL 3005, a deep blue or black, with gold or black hardware.
Can the door be a different colour from the frame?
Yes. The leaf follows the frame by default; choose another colour for the door and only the leaf takes it.
Do coloured front doors cost more than white?
The configurator shows no colour as dearer than another. What your colour costs is in your quote.
Does a coloured uPVC door need painting?
No. The colour is a foil applied at the factory. Clean it with lukewarm water and a soft cloth; a scouring pad leaves marks.
Can I have any RAL colour?
On aluminium, yes. On uPVC you choose from the thirty-five colours on the chart.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote