Composite front doors compared with uPVC and aluminium
Composite front doors are the best-selling front door in the UK, and the name covers a particular build: a door leaf with a glass-reinforced plastic skin over an insulating core. We don't make that door. We make uPVC and aluminium front doors to measure, and this page sets out honestly what a composite door is, what to ask before you buy one and where a uPVC or aluminium door is the better or the worse choice.
What is a composite front door?
"Composite" only means the leaf is made of more than one material. In the UK trade it almost always means a slab door: a solid core of insulating foam, sometimes with a timber or reinforced edge frame, faced on both sides with a moulded skin of glass-reinforced plastic (GRP). The skin carries the panel pattern and often a woodgrain texture, and it is painted or coloured in the factory. The leaf hangs in an outer frame that is usually uPVC.
So a composite front door is not a different frame from a uPVC door: in most cases the frame is the same material. The difference is the leaf. A uPVC door has a leaf built from uPVC profile with a panel set into it; a composite door has a thick, solid slab instead.
Why composite front doors are popular
The appeal is easy to see. A thick slab feels solid when it closes, the GRP skin can imitate painted timber convincingly, and there are hundreds of designs in standard sizes. For a period house that wants the look of a painted panelled door without the painting, it is a sensible product, and that is why most UK door companies sell little else.
What to check before you buy a composite door
Composite doors are not one product, so the useful questions are specific. How thick is the leaf, and what is the core made of? Is the leaf made to your size, or is a standard slab cut down and the frame made to suit? What is the U-value of the whole door set, not of the leaf? Which lock and cylinder come with it, and is the security rating for the door set as tested or for the cylinder alone? And who fits it and notifies the work?
Ask for the Door Set Energy Rating or the whole-door U-value in writing. In England a replacement door with 60% glass or less has to reach 1.4 W/m²K or DSER band D, and with more than 60% glass 1.4 or band C (Approved Document L). That applies to a composite door exactly as it does to ours.
Composite, uPVC or aluminium: the honest comparison
A uPVC front door uses a uPVC leaf with a panel in it, in a uPVC frame. Ours have a sightline of 119 mm and are the lower-cost choice. The leaf is not a solid slab, so it feels lighter in the hand than a thick composite leaf; on the other hand the frame and leaf come from the same profile system and are made together, to your size.
An aluminium front door is a different class: a thermally broken aluminium frame and leaf, powder coated in any RAL colour. We supply three Aluprof profiles as doors: the MB-79N (70 mm deep, Uf 0.83 W/m²K), the MB-86N (77 mm, Uf 0.57) and the MB-Ferroline with its slim steel look (110 mm, Uf 1.50). Aluminium stays stiff with a heavy leaf that opens all day, and it is where you go for a slim frame or an exact colour.
Where a composite door has the edge is the traditional painted-timber look in a standard size off the shelf. Where uPVC and aluminium have the edge with us is that the door, the frame, the side panels and the threshold are made as one unit to the size you enter, in the same colour as your windows if you want.
Composite front door colours, and the alternatives
Composite doors come in the colours of the maker's own chart. Our uPVC doors come in white, cream and a range of foils, among them anthracite, basalt grey, agate grey RAL 7038, black, fir green RAL 6009 and wine red RAL 3005, and the leaf can differ from the frame. On aluminium any RAL colour is possible, smooth or textured. Inside and outside can differ on both.
Sizes: standard slab or made to measure
Composite doors are made in a range of leaf sizes, and the frame takes up the rest of the opening. Ours start from a size you enter: a door section from 600 mm wide and up to 2,500 mm high, side panels from 180 mm. The standard layouts are a single door at 1,000 × 2,100 mm, a door with one side panel at 1,450 × 2,100 mm and with two side panels at 1,850 × 2,100 mm, but you are not tied to them.
Security: what a rating covers
Many composite doors are sold with a security test for the door set. A test like that belongs to the complete door as fitted, including the fixing into the wall. We supply and don't install, so we don't claim a rating for your fitted door. What we supply: a cylinder with three keys, all cylinders in one order on the same key if you ask, a class C security cylinder as an option and P4A laminated safety glass (EN 356).
How much is a composite front door?
Composite doors are usually sold at a fixed price per design, with fitting quoted on top or included. We don't price composite doors, so we can't compare figures. What sets the price of our uPVC and aluminium front doors is the size, the layout, the glass, the colour and the options; you get a quote for your door within three working days. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.
Supply only: who fits it
We supply, we don't install. Your installer takes out the old door and frame, fits the new door set and notifies the work through a competent person scheme such as FENSA or Certass, or you notify building control first. Production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. Scotland and Northern Ireland have their own rules.
Frequently asked questions
Do you sell composite front doors?
No. We don't make the GRP-skinned composite door. We make uPVC and aluminium front doors to measure, with frame, leaf, threshold and cylinder as one unit.
What is a composite front door made of?
Usually a solid core of insulating foam faced with glass-reinforced plastic (GRP) skins, hung in an outer frame that is most often uPVC.
Are composite doors better than uPVC?
Not by definition. A composite leaf is a thicker slab; a uPVC door is lighter and costs less. Compare the whole-door U-value, the lock and the way it is made and fitted rather than the name.
Are composite doors warmer than aluminium?
Compare the U-value of the whole door set, not the material. Our best aluminium door profile, the MB-86N, has a frame Uf of 0.57 W/m²K; the U-value of your whole door is in your offer.
How much is a composite front door in the UK?
That depends on the maker, the design and whether fitting is included. We don't sell composite doors and don't quote their prices; our uPVC and aluminium doors are priced on your size in a quote within three working days.
Do composite front doors come with a frame?
Usually yes, as a door set. Ours always do: frame, leaf, threshold, hardware and cylinder, made to your size.
Do I need Building Regulations approval for a new front door?
In England and Wales replacing an external door is notifiable: your installer notifies it through a competent person scheme, or you notify building control before the work.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote