Skip to content
Made to measure to the millimetre Reply within one working day Delivery to the UK, quoted with your offer Size guarantee on every window and door
Rovenzia
Home/uPVC front doors with frame, made to measure/New front door cost: what you pay for
Front doors

New front door cost: what you pay for

The cost of a new front door is the door set itself plus everything around it: the layout, the glass, the colour, the lock, and then taking out the old door, fitting the new one and notifying the work. This page goes through each part so you can compare quotes like for like, and see where the money goes with a made-to-measure uPVC or aluminium door from us.

Made to measureto the millimetre
Quote within 3 working daysfor your sizes, with no obligation
Delivery to the UKquoted with your offer
Size guarantee ±2 mmsupplied as ordered

How much is a new front door? The short answer

There is no single price for a front door, because no two door openings are the same. A narrow single door in white uPVC and a wide aluminium door with side panels on both sides are different products, even if both are "a new front door". What we can show you is what comparable doors have actually cost with us: our front door prices page gives figures measured on our own quote archive, with the number of quotes each figure rests on. For your own door you get an exact quote within three working days of sending your request.

Price lists that show a door "from" a figure usually mean one design in one size and colour. A front door from us is always a complete door set: outer frame, leaf, threshold, hinges, lock, cylinder and keys, made to your size. A figure for a door leaf alone, a figure for a door set supplied only, and a figure for a door supplied and fitted are three different things, and comparing one with the other is where most budgets go wrong.

Material: uPVC or aluminium

The biggest single choice is the material. uPVC is the lower-cost front door, with a sightline of 119 mm. It suits most houses and most budgets, and it needs no painting.

Aluminium costs more for the same size; you pay for a slimmer frame, any RAL colour and a leaf that stays stiff when it is heavy and used all day. We supply aluminium front doors on three Aluprof profiles: the MB-79N as the entry model and the lowest cost of the three, the MB-86N as the best-insulating, and the MB-Ferroline for a slim steel look. We don't make timber doors. The guide prices measured on our own quotes are on the price page.

Size and layout: single door, side panels, fanlight

A single front door at the standard size of 1,000 × 2,100 mm is the cheapest layout: no extra glass, no extra frame. A side panel adds a fixed glazed section and the frame length around it; the layouts with one side panel start at 1,450 × 2,100 mm and with two at 1,850 × 2,100 mm. It shows in the price, but it is usually far less than a second door would be: a side panel carries no lock, no hinges and no handle.

A taller door or a fanlight above adds material too. If your opening is taller than a door can be, put the fanlight in the notes with your request and we look at what fits.

Every door we make is made to measure, so you don't pay for packing out a stock size with trims. Within the limits you can make the door any size: from 600 mm wide and up to 2,500 mm high, with side panels from 180 mm. Within those limits the price follows the size: a wider or taller door needs more profile, a larger panel and more glass.

Door design and glass

You choose the door design in the configurator, and the design decides how much glass is in it. Within one size, glass is where the price moves most: a solid door, a door with a small vision panel and a door with a large glazed area are priced differently, and a side panel full of glass costs more than a solid section of the same size.

Double glazing is standard. Triple glazing insulates noticeably better and costs more; in a door with a lot of glass that difference counts for more than in a solid one. Obscure glass and P4A laminated safety glass (EN 356), which holds together if it is struck, are options. A door that faces the street often needs obscure glass, and a door with glass low down or next to the lock is where laminated glass is worth it.

Colour

White uPVC is the colour of the material itself; greys, anthracite, black, greens, reds and woodgrains are foils laminated on top. On aluminium every colour is powder coated, in any RAL colour. The frame and the leaf can each have their own colour, and inside and outside can differ, so a white hall side with an anthracite street side is one setting in the configurator, not a special order. What your combination costs is in the quote.

Lock, cylinder, handles, threshold and corner joint

Every door comes with a cylinder and three keys. A class C security cylinder is an option, and all cylinders in one order can run on the same key, which saves a bunch of keys when you replace a front and a back door together. Handles come in black, white, cream, grey, silver, titanium and gold, and in anthracite on aluminium. Under the door you choose a threshold of 55 or 35 mm, black or grey, or a low threshold.

A square corner joint, welded at 90° like a timber frame instead of the usual 45° mitre, takes more work in the factory and costs more. All of these are chosen in the options step, and each one is shown in your quote, so you can see what it adds.

Supply only or supplied and fitted?

Supply only means you choose the door and your own installer, and you see the price of each separately. Supplied and fitted from one company is simpler, but the door and the fitting are in one figure. With us it is always supply only: we supply, we don't install. The door set is made to your size, measured before dispatch, and fitted by whoever you choose.

Fitting is therefore a separate price from your own installer. It normally covers taking out the old door and frame, fitting and fixing the new door set, sealing it, making good the plaster and the reveals inside and out, and taking the old door away. Ask for each of those to be listed: a low fitting price that leaves out disposal or making good is not a low price.

Building Regulations: part of the cost

Replacing an external door is notifiable work in England and Wales. An installer registered with a competent person scheme such as FENSA or Certass notifies it and you get a certificate; if your installer isn't registered, you notify building control before the work, and building control charges for that. Ask whether that notification is in the fitting price.

In England, a replacement door with 60% glass or less has to reach a U-value of 1.4 W/m²K or Door Set Energy Rating band D; with more than 60% glass, 1.4 or band C. A replacement door may not perform worse than the one it replaces. The U-value of your door is in your offer. Scotland and Northern Ireland have their own rules.

What a front door quote should include

A quote you can compare names the complete door set: outer frame, leaf, panel, threshold, hinges, lock and cylinder. It names the glass, the colours inside and outside, and the size it is made to. It gives the U-value of the whole door, which is the figure Building Regulations look at, and the production time. Ours does all of that.

Delivery, VAT and what comes on top of the door

Our prices are in GBP, excl. UK VAT and import duties, which are payable on delivery. Delivery to the UK is quoted with your offer. Add both when you compare with a UK supplier whose price includes VAT, so you compare the same total.

Two more things belong in your budget: the fitting, priced by your installer, and any building work if the opening changes, for example when you widen it to add a side panel. A door made to your measurements falls outside the right to cancel, which we tell you before you order. That is one more reason to measure carefully, or to let your installer measure.

Do you need a new frame as well?

With us, yes: every front door comes as a complete door set, frame and leaf made together. A new leaf hung in an old frame rarely seals or locks the way it was designed to, and the frame is usually the part that has worn first. It also means the price you compare is for the whole door, not a leaf that needs more work around it.

How to keep the cost down

The lowest price for a front door with us is uPVC, white, close to the standard size, with double glazing. Every step away from that is a choice you can weigh: a side panel for light, triple glazing for warmth, a colour for the street. If you are replacing the front and back door at the same time, put both in one request: one order, one delivery, and all cylinders on the same key if you want.

How to get a price for your new front door

Put the door together in the configurator: layout, design, size, glass, colour and options. Send it as a request and you get the quote for your size within three working days. You decide whether to order once you have seen it. Production time is 6 to 8 weeks.

Measure the width at the top, in the middle and at the bottom, and the height on both sides. Order on the smallest figure, minus the fitting gap your installer wants: you order on the outside size of the frame, and we make it within ±3 mm on width and height.

FAQ

Frequently asked questions

How much is a new front door?

It depends on the material, the size, the layout, the glass, the colour and the lock. A single uPVC door at a standard size in white is the lowest price; aluminium, side panels, triple or laminated glass and foils add to it. Our front door prices page shows what comparable doors have cost with us; your own quote comes within three working days.

How much does a new front door cost with the frame?

Our doors always come with the frame: frame, leaf, threshold, hardware and cylinder as one door set, made together so it seals and locks as it was made to. The price you get is for the whole door.

How much is a new front door supplied and fitted?

We supply only, so fitting comes from your own installer. Ask them to list removal of the old door, fitting, making good, disposal and the Building Regulations notification.

Is a new front door cheaper in uPVC?

Yes, uPVC is the lower-cost material for a front door with us. Aluminium costs more for the same size but gives a slimmer frame, any RAL colour and more strength for a heavy leaf.

Does a side panel add much to the price?

It adds a glazed section and frame length, but no lock, hinges or handle, so it costs far less than a second door. If you are unsure, configure both versions and send them in one request.

Are colours more expensive than white?

White is the colour of the uPVC itself; other colours are foils or, on aluminium, powder coating. What your colour costs is in your quote.

Are your prices including VAT?

No. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery.

How long does a new front door take?

The quote comes within three working days and production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer.

Made-to-measure quote

Know what you want? Put it together.

No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.

Request a quote
Made-to-measure quote

Configure your window or door

Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.

Request a quote
Request a quoteSend a drawing