Cheap French doors
Cheap French doors come down to four things with us: size, material, glass and colour. We have no fixed price list. Below is what a door leaf cost with us, in GBP excl. VAT and import duties, and the calculator estimates your size. So how much are French doors? Enough to be worth getting the size right: under the table and the calculator you'll find what moves the price, which choices are cheap and which are not, and what to add for delivery and fitting.
What a uPVC door leaf with frame cost with us
Measured on our own quotes from February 2023 to July 2026 inclusive, per unit at the size in the table. The amount is the median; the range runs from the lower to the upper quarter of the observations. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery; excluding delivery and installation. This is a guide price, not a quote.
| Unit | Measured size | Typically | Range | Per m² | Quotes |
|---|---|---|---|---|---|
| Door | 1,000 × 2,300 mm | £1,331 | £1,149 – £1,442 | £579 | 23 |
Price per m² = the measured amount divided by the area of the size in the table. Where there is a dash, the spread is too wide for a single amount and the range is what counts.
Work out your French doors price
Choose the material and enter the overall size of the doors with frame. You'll see what doors of that size typically cost in our quotes. It's a guide price, not a quote: the real price comes within three working days in the made-to-measure quote.
Excluding VAT and import duties, which are payable on delivery; excluding delivery and fitting. Worked out with the price per m² of comparable doors in our quote archive; glass, colour and layout can still move the amount.
French doors prices: what sets them
The width and height decide how much frame and glass goes into the doors. uPVC is the cheaper of the two materials for a door. Triple glazing costs more than double. On screen no colour costs more than another; what your colour costs is in your made-to-measure quote. Because every pair is made to measure, two doors that look alike in a photo can differ quite a bit in price: a pair 1,200 mm wide and 2,100 mm high has far less frame and glass than one 1,800 × 2,400 mm. Measure first, then compare.
Double French doors cost
Our French doors are always a pair in one frame, a main door and a secondary door. The opening starts at 1,200 mm, because the narrowest door leaf is 600 mm. A leaf can be up to 2,500 mm tall. What you receive is the complete set: both doors hung in one outer frame, glazed, with hardware, a handle on the main door and a threshold 55 or 35 mm high. You don't buy a frame and doors separately, and nothing has to be assembled before your fitter sets it in the opening.
French doors with side panels: cost
If you want fixed glass beside the doors, it becomes a set. You put it together in the configurator and request it as one quote, so you see what the whole thing costs. A fixed side panel has no hinges or lock, so per square metre it is cheaper than an opening door. That makes French doors with side panels a sensible way to fill a wide opening: two leaves of a comfortable width in the middle, fixed glass either side, instead of two very wide and heavy leaves.
uPVC French doors supplied and fitted?
We don't give that price, because we don't install. You pay the factory price plus delivery and arrange fitting yourself or with an installer. To compare with a fitted price from a local firm, add three things to our offer: delivery to the UK, which is quoted with your offer; your installer's labour; and making good inside and out. Ask your installer before you order, because a straight swap in an existing door opening is a smaller job than turning a window into French doors, which means cutting the brickwork down to the floor.
French doors quote
You put the doors together in the configurator, with no form first, and request a quote. It comes within three working days, with the price for your sizes, glass and colour. Production takes 6 to 8 weeks once you accept. If you want two versions side by side, uPVC and aluminium or double and triple glazing, put both in the same request.
How to read the calculator
The calculator works with the price per square metre of French doors we have quoted before, in the material you choose. You enter the overall size of the whole frame, both doors together, and get back a range with the number of quotes it rests on. The more quotes, the firmer the figure.
The range is in GBP, excl. UK VAT and import duties, which are payable on delivery, and without delivery: delivery to the UK is quoted with your offer. It's a guide price, not a quote: different glass or an added side panel can move the amount. If we have measured too little for your size or material, the calculator says so plainly and gives no figure.
Why a small door costs more per square metre
A few fixed parts go into every French door, however large: two sets of hinges, a lock, a handle, the closure between the two doors and a threshold. On a narrow door you spread those over fewer square metres. That's why the price per square metre drops as the doors get wider and taller, even though the total goes up. For cheap French doors that is the first lesson: a narrow pair is not proportionally cheaper than a wide one, so don't make the doors narrower than the opening only to save money. Fill the opening properly and save on glass and material instead.
Choices you'll see in the quote
Besides size and material, a few choices show up in the quote. Triple glazing insulates better than double and costs more. Laminated glass lowers the risk of injury if the glass breaks and makes the door harder to break through. A handle with a lock carries SKG 2 stars, the Dutch security rating for hardware. Under the doors you choose a threshold 55 or 35 mm high.
If you add one or two side panels beside the doors, or a top light above them, it becomes a larger unit with more frame and glass. You price that as one whole, so you see straight away what the entire opening costs and not just the doors.
uPVC or aluminium for French doors
uPVC is our cheapest choice for a door. Aluminium costs more, but has a slimmer sightline, so more glass fits into the same opening. If light and a slim line matter most to you, compare both in the configurator at the same size. For uPVC French doors on a budget, the combination that keeps the price lowest is uPVC, double glazing and a size that fits the existing opening without building work.
Building Regulations and the glass in your French doors
In England, replacement doors with more than 60% glass need a U-value of 1.4 W/m²K or Door Set Energy Rating band C; other doors 1.4 W/m²K or band D. That is the value of the whole door, not of the glass alone; the U-value of your doors is in your quote. Replacing a door can be notifiable work: an installer registered with a competent person scheme, such as FENSA or Certass, notifies it, or you notify building control beforehand. Because we don't install, your installer arranges this. Scotland and Northern Ireland have their own rules.
Cost by number of sections
The more sections, the more frame, glass and hardware. Two doors in one frame are the starting point. Add side panels beside them or a fanlight above, and it becomes a unit of three or more sections. Fixed sections usually cost less per square metre than doors, because there is no hinge, lock or handle in them. So a wide unit with two doors and two fixed side panels usually costs less per square metre than the same width with four doors.
Cost of aluminium French doors
For a door, aluminium is dearer than uPVC. You pay for a slimmer sightline, more load-bearing capacity per leaf and any RAL colour. Set the calculator to aluminium and you see what aluminium French doors of that size cost in our quotes. We supply, we don't install; allow for a local installer to fit them.
Fitting: what to agree with your installer
In the UK we supply, we don't install, so fitting is not in our offer. Agree with your installer whether removing the old doors or frame, taking them away and making good inside are in their price. You measure yourself: the sizes you give are the ones we make. Your installer also notifies the work through a competent person scheme such as FENSA or Certass, or you notify building control.
Costs outside the doors themselves
If you open up a wall for new doors, or widen an existing opening, there is building work on top: a lintel or beam above the opening, sometimes a structural engineer's calculation. After that comes making good inside round the frame, and sometimes adjusting the floor or patio at the threshold. Those items aren't in our offer; ask your builder for them separately.
How to keep the cost down
Choose uPVC if slimness isn't the deciding factor. Keep the doors to a size that fills the opening, without widening the wall. Put fixed glass beside the doors instead of extra doors. And compare double with triple glazing: triple costs more, but gives the doors a lower whole-door U-value against the Part L limit.
Production time and planning
You have the offer within three working days. Once you accept it, production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer; plan the fitting date with your installer once the delivery date is known.
Frequently asked questions
How much do French doors cost?
The calculator on this page gives a guide price for your size, measured on our own quotes. The real price for your size, material, glass and colour is in the quote, within three working days.
How much do uPVC French doors cost?
Less than aluminium at the same size: uPVC is the cheaper of the two for a door. The amount for your doors is in the quote.
How can I get cheaper French doors?
You save most with uPVC and double glazing, at a size that fits your opening as it is. Leave out extras you don't need, such as a top light. The quote gives you the price for exactly that choice.
How much are French doors with side panels?
A set is doors plus fixed glass in one unit. Because the share of door and glass differs per set, we always price it on your size.
Is fitting included?
No. We supply, we don't install. Delivery to the UK is quoted with your offer. Your own installer fits the doors and, where the work is notifiable, notifies it.
Are French doors dearer than a sliding patio door?
For a narrow opening usually not; for a wide opening a sliding patio door can be the logical choice. Compare them at your size: put both together and request a quote for each.
Can I use the calculator for doors with side panels?
The calculator works with French doors only. For doors with side panels or a top light, you put the whole unit together in the configurator; the amount for the entire opening is then in your quote.
What does it cost to fit French doors?
That's a price from your own installer: we supply, we don't install, so fitting isn't in our offer. Ask whether removing the old frame and making good inside are included.
Are aluminium French doors dearer than uPVC?
Yes, at the same size. Aluminium is slimmer in view and comes in any RAL colour.
How long does delivery of French doors take?
Production time is 6 to 8 weeks after you accept the offer, and delivery to the UK is quoted with your offer. You have the offer within three working days.
What do French doors with side panels cost?
More than the doors alone, but usually less per square metre: fixed glass has no hinge or lock. Put the whole unit together and the offer shows the price for the whole opening.
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Configure your window or door
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request a quote