French casement window in Aluprof MB-Ferroline
French casement window in aluminium, in the Aluprof MB-Ferroline profile. Standard size 1,600 × 1,500 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,600 × 1,500 mm
Configure this french casement windowSpecifications: French casement window in Aluprof MB-Ferroline
| Material | Aluminium |
|---|---|
| Brand | Aluprof |
| Profile | Aluprof MB-Ferroline |
| Uf | 1.50 W/m²K |
| Frame depth | 110 mm |
| Sightline | 97 mm |
| Outer frame width | 55.5 mm |
| Standard size of this layout | 1,600 × 1,500 mm |
| Maximum unit size | 6,000 × 3,000 mm |
| Maximum sash width | 1,600 mm |
| Sections in this layout | Side-hung (inward opening), Side-hung (inward opening) |
| Delivery quoted with your offer | supplied, not installed |
Aluprof MB-Ferroline — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
14 colours for aluminium windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a french casement window in Aluprof MB-Ferroline?
The Aluprof MB-Ferroline is made to look like steel pivot doors and old factory windows: 97 mm of sightline for frame and sash together, in aluminium. At 97 mm it has the slimmest combined frame-and-sash sightline of the Aluprof windows; only the Reynaers CS 77 (89 mm) goes below it in aluminium — for comparison, the Gealan S 9000 in uPVC sits at 119 mm. That slimness costs insulation: Uf 1.50 W/m²K, against 0.57 for the MB-86N. The 110 mm frame depth is there for stiffness, not for insulation. It is our answer to the search for steel look or Crittall style aluminium windows: the slim lines and dark frames of a steel window, made in aluminium with a powder-coated finish.
Steel-look aluminium windows: a 97 mm sightline, the slimmest of the Aluprof windows.
New build. Suitable, provided the energy calculation can carry Uf 1.50. That is easier with a small window area than with a glazed facade. Glazing bars add to the factory-window look; with 97 mm of sightline they read as divided panes rather than strips on the glass.
Renovation. This is where the profile comes into its own: in the place where there used to be steel. Old steel windows in a 1930s house or a converted industrial building are the typical case: the new frame keeps the slim lines and takes double or triple glazing.
Aluprof MB-86N. A sightline 31 mm wider, but Uf 0.57 instead of 1.50. Choose it if insulation matters more than slim lines.
Reynaers SlimLine 38. The same steel-look idea, taken further: Reynaers gives 33 mm at the frame where the Ferroline stands at 55.5 mm, with Uf 1.9 against 1.50 here. Both are a choice for the look of a steel window. For the thinnest lines of all, take the SlimLine 38; for one Aluprof system across windows and doors, the Ferroline.
French windows, or French casement windows, are a pair of side-hung sashes that close against each other with no mullion between them: open, the whole width is clear, almost like a pair of doors. Ours open inwards and are made to measure.
A standard double window has a mullion that stays in place even when the sashes beside it open. A French casement doesn't have one: both sashes are hinged at the outer edges and close against each other in the middle with a draught seal, not against a fixed mullion. Closed, it looks like an ordinary double window; open, the whole width is clear, with no mullion in the way. If you're replacing an existing window without a mullion, you'll recognise this form straight away: it is the one that recreates that look. That is what the name French windows means: a window version of French doors. The difference with French doors is the bottom. French windows sit on a sill in a wall above the floor and lock with a window handle; French doors run down to a threshold at floor level and you walk through them. The difference with an ordinary casement is the middle: a casement window is one sash, or two sashes with a fixed mullion between them.
Both sashes here are side-hung casements that open inward, not tilt and turn: you get the full opening, but not the tilt position for an ordinary gap. The standard size is 1,600 × 1,500 mm. If you want the same wide opening with a tilt position on one or both sides, look at the standard double windows (the 2-pane window with one tilt and turn sash, the 2-pane window with two tilt and turn sashes), which have a fixed mullion. Inwards or outwards? Many French windows in the UK open outwards. Ours open into the room, like all our windows. That means curtains, blinds and anything on the window board have to clear the sashes, and in return you can clean the outside of the glass from indoors and the open sashes aren't caught by the wind. You choose the material in the configurator, uPVC or aluminium, and it shows which profiles take this layout.
All about the Aluprof MB-Ferroline profile All about the french casement window layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
French casement window in 26 other profiles
Other layouts in Aluprof MB-Ferroline
Frequently asked questions about french casement window in Aluprof MB-Ferroline
How large can a french casement window in Aluprof MB-Ferroline be?
In Aluprof MB-Ferroline we supply units up to 6,000 × 3,000 mm. The standard size of this layout is 1,600 × 1,500 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a french casement window in Aluprof MB-Ferroline cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits Aluprof MB-Ferroline?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a french casement window in Aluprof MB-Ferroline come in?
For aluminium windows and doors you choose from 14 colours, including RAL 9010 pure white, RAL 9016 traffic white, RAL 7016 anthracite grey, RAL 7016 smooth. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your french casement window in Aluprof MB-Ferroline
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this french casement window