Glazed back door in Aluplast Ideal 4000

The Ideal 4000 is Aluplast's flush profile. Frame and sash sit in one plane, without the recessed sash of the block profile, and the window doesn't need a rebate. The frame is 70 mm deep, divided inside into five chambers with a double seal, and the outer frame has a closed steel reinforcement as standard. For a complete window with glass of Ug 1.0, the system data give Uw 1.3 W/m²K — the same as the deeper Ideal 7000 NL.

Flush uPVC profile, 70 mm deep with five chambers: clean-lined, without a rebate and affordable, for windows, doors and every front door.

One door that opens outwards rather than inwards, glazed from top to bottom: a back door that works as a window onto the garden as well.

Where a front door opens inwards, this door opens outwards: the leaf swings over the patio rather than into the room, so it stays out of the way of the kitchen or living room behind it. The door itself is glass, more so than a front door, because the view of the garden is usually the point. If you are looking for a solid or half-glazed back door, note that this layout is a glazed door.

The standard size is 1,000 × 2,100 mm, the same as a single front door but with the opening direction reversed. If you want a wider opening onto the patio, French doors — two of these doors side by side — or a sliding patio door are the layouts made for that.

All about the Aluplast Ideal 4000 profile All about the glazed back door layout