Glazed back door in Aluplast Ideal 7000 NL
Glazed back door in uPVC, in the Aluplast Ideal 7000 NL profile. Standard size 1,000 × 2,100 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,000 × 2,100 mm
Configure this glazed back doorSpecifications: Glazed back door in Aluplast Ideal 7000 NL
| Material | uPVC |
|---|---|
| Brand | Aluplast |
| Profile | Aluplast Ideal 7000 NL |
| Uf | 1.00 W/m²K |
| Frame depth | 120 mm |
| Sightline | 133 mm |
| Outer frame width | 84 mm |
| Standard size of this layout | 1,000 × 2,100 mm |
| Maximum unit size | 4,000 × 2,600 mm |
| Maximum sash width | 1,400 mm |
| Sections in this layout | Door |
| Delivery quoted with your offer | supplied, not installed |
Aluplast Ideal 7000 NL — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a glazed back door in Aluplast Ideal 7000 NL?
The Ideal 7000 NL is Aluplast's block profile: a recessed, block-shaped look in which the sash sits back in the outer frame, designed for the Dutch style of building. The frame is 120 mm deep, the sash 85 mm, and inside there are six chambers with a double seal and a closed steel reinforcement as standard. The profile reaches Uf 1.00 W/m²K; for a complete window with glass of Ug 1.0, the system data give Uw 1.3 W/m²K. Frame and sash together have a 133 mm sightline.
Recessed block profile, 120 mm deep with six chambers, designed for Dutch elevations: windows, doors and every front door in our range.
One door that opens outwards rather than inwards, glazed from top to bottom: a back door that works as a window onto the garden as well.
Where a front door opens inwards, this door opens outwards: the leaf swings over the patio rather than into the room, so it stays out of the way of the kitchen or living room behind it. The door itself is glass, more so than a front door, because the view of the garden is usually the point. If you are looking for a solid or half-glazed back door, note that this layout is a glazed door.
The standard size is 1,000 × 2,100 mm, the same as a single front door but with the opening direction reversed. If you want a wider opening onto the patio, French doors — two of these doors side by side — or a sliding patio door are the layouts made for that.
All about the Aluplast Ideal 7000 NL profile All about the glazed back door layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Glazed back door in 22 other profiles
Other layouts in Aluplast Ideal 7000 NL
Frequently asked questions about glazed back door in Aluplast Ideal 7000 NL
How large can a glazed back door in Aluplast Ideal 7000 NL be?
In Aluplast Ideal 7000 NL we supply units up to 4,000 × 2,600 mm. The standard size of this layout is 1,000 × 2,100 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a glazed back door in Aluplast Ideal 7000 NL cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits Aluplast Ideal 7000 NL?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a glazed back door in Aluplast Ideal 7000 NL come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your glazed back door in Aluplast Ideal 7000 NL
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this glazed back door