Glazed back door in VEKA Softline 76 MD
Glazed back door in uPVC, in the VEKA Softline 76 MD profile. Standard size 1,000 × 2,100 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,000 × 2,100 mm
Configure this glazed back doorSpecifications: Glazed back door in VEKA Softline 76 MD
| Material | uPVC |
|---|---|
| Brand | VEKA |
| Profile | VEKA Softline 76 MD |
| Uf | 1.10 W/m²K |
| Frame depth | 76 mm |
| Sightline | 112 mm |
| Outer frame width | 71 mm |
| Standard size of this layout | 1,000 × 2,100 mm |
| Maximum unit size | 3,200 × 3,200 mm |
| Maximum sash width | 1,400 mm |
| Sections in this layout | Door |
| Delivery quoted with your offer | supplied, not installed |
VEKA Softline 76 MD — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a glazed back door in VEKA Softline 76 MD?
Softline 76 MD sits between VEKA's 70 and 82: 76 mm frame depth, five chambers and a Uf of 1.1 W/m²K. MD stands for Mitteldichtung, a centre seal. Between outer frame and sash there are three sealing levels instead of two, with the extra seal in the middle of the profile. The glazing rebate is 28 mm deep and takes glass up to 48 mm. As standard the profile is prepared for RC 2 burglar resistance; reaching the class itself needs matching hardware and glass. The chambers carry steel reinforcement, and the walls meet class A of DIN EN 12608. For the outside there are more than fifty colours and finishes, aluminium cover shells in RAL colours or the VEKA SPECTRAL surfaces. Compared with the 70 AD you gain a seal, room for thicker glass and a better Uf. The window opens inwards: tilt and turn, side-hung, tilt-only or a door.
VEKA with a centre seal, prepared for RC 2: 76 mm, glass up to 48 mm and Uf 1.1 W/m²K.
New build. Suitable. If you want the profile to insulate a little better still, look at the Softline 82 MD.
Renovation. Suitable. At 76 mm the frame sits less far into the wall than a profile of 82 mm or more.
VEKA Softline 70 AD. Same make, 6 mm shallower and with a rebate seal: two seals instead of three. You see less profile, 99 mm of frame and sash against 112 mm, but the Uf rises from 1.1 to 1.3 and the glass can be no more than 42 mm thick.
VEKA Softline 82 MD. Also a centre seal, but 6 mm deeper, with 7 chambers in the outer frame against 5 and Uf 1.0 against 1.1. It takes glass up to 54 mm. In view there is little in it: 114 mm against 112 mm.
One door that opens outwards rather than inwards, glazed from top to bottom: a back door that works as a window onto the garden as well.
Where a front door opens inwards, this door opens outwards: the leaf swings over the patio rather than into the room, so it stays out of the way of the kitchen or living room behind it. The door itself is glass, more so than a front door, because the view of the garden is usually the point. If you are looking for a solid or half-glazed back door, note that this layout is a glazed door.
The standard size is 1,000 × 2,100 mm, the same as a single front door but with the opening direction reversed. If you want a wider opening onto the patio, French doors — two of these doors side by side — or a sliding patio door are the layouts made for that.
All about the VEKA Softline 76 MD profile All about the glazed back door layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Glazed back door in 28 other profiles
Other layouts in VEKA Softline 76 MD
Frequently asked questions about glazed back door in VEKA Softline 76 MD
How large can a glazed back door in VEKA Softline 76 MD be?
In VEKA Softline 76 MD we supply units up to 3,200 × 3,200 mm. The standard size of this layout is 1,000 × 2,100 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a glazed back door in VEKA Softline 76 MD cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits VEKA Softline 76 MD?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a glazed back door in VEKA Softline 76 MD come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your glazed back door in VEKA Softline 76 MD
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this glazed back door