Kömmerling 76 MD
Kömmerling's uPVC window: 76 mm, 6 chambers and Uf 1.0 W/m²K.
Kömmerling 76 MD
Kömmerling 76 MD is a uPVC window system sold mainly in France and Belgium. The profile is 76 mm deep, has 6 chambers and closes with a centre seal: three sealing levels between outer frame and sash. The Uf is 1.0 W/m²K and it takes glass up to 50 mm. At 76 mm it is one of the shallower uPVC profiles we offer, with about 116 mm of frame and sash in view. The window opens inwards: tilt and turn, side-hung, tilt-only or a door, but no window that opens outwards, whether top-hung or bottom-hung.
Fixed window
Glass straight into the outer frame, without a sash. For a fixed light next to a door, a top light or a window that doesn't need to open.
Request my quoteTilt and turn window
Turn it to clean the outside, tilt it to ventilate. The sash opens inwards, as on every window in this profile.
Request my quoteDoor
Back door or garden door on the same profile, with the same 76 mm frame depth as the windows next to it.
Request my quote23 layouts in Kömmerling 76 MD
From a fixed window to a sliding patio door: every layout this profile can do, each with its own page and a direct way into the configurator.
How much does a Kömmerling 76 window cost?
Our guide prices come from our own quote history, and this type has not come up in it for this profile. That is why there is no amount. Just request the quote: we work it out on your own sizes.
The price of a Kömmerling 76 window depends on four things: the overall size, the layout (fixed, tilt and turn, door), the glass and the colour. We don't yet have a guide price from earlier quotes for this profile, and the configurator shows no amount. You put your window together, send it as a request, and the price for your sizes is in your made-to-measure offer — you'll hear from us within three working days. Prices in GBP, excl. UK VAT and import duties, which are payable on delivery. Delivery to the UK is quoted with your offer; hardware and any discount are in that offer too. We supply, we don't install.
Configure and request a quoteKömmerling 76 MD specifications
| Material | uPVC |
|---|---|
| Uf | 1.00 W/m²K |
| Frame depth | 76 mm |
| Outer frame width | 74 mm |
| Sightline | 116 mm |
| Maximum size | 3,200 × 3,200 mm |
| Maximum sash width | 1,400 mm |
| Size tolerance | ±2 mm up to 1 m, ±3 mm above that |
Move over the drawing to see the dimensions
Uf 1.0 W/m²K is the heat loss through the profile itself, as Kömmerling states it, not through the whole window. For that, the glass (Ug) and the ratio between profile and glazed area count too. The frame width and sightline in the table are guide dimensions: the final size is in your made-to-measure offer.
This is a schematic cross-section, built from the measured frame depth, frame width and sightline. The chamber layout, seals and reinforcement are not measured — they come from the supplier's technical drawing.
The Kömmerling 76 MD compared
Same size, same specification. Only the profile differs.
| Specifications | Kömmerling 76 MD | Rehau Synego | Gealan S 9000 MD |
|---|---|---|---|
| Material | uPVC | uPVC | uPVC |
| Uf | 1.00 | 0.94 | 0.89 |
| Frame depth | 76 mm | 80 mm | 82.5 mm |
| Sightline | 116 mm | 117 mm | 119 mm |
| Maximum size | 3,200 × 3,200 mm | × 2,500 mm | 3,200 × 3,200 mm |
| Why something else | Also a centre seal, and 4 mm deeper: 80 mm. In view there is hardly anything between them, 117 mm against 116 mm, and the glass goes up to 51 mm against 50 mm. The Synego insulates slightly better: Uf 0.94 against 1.0. | The German S 9000 with a centre seal: 82.5 mm deep, so 6.5 mm deeper, and 3 mm wider in view, 119 mm against 116 mm. In return you get a lower Uf, 0.89 against 1.0, and glass up to 52 mm. |
Side by side, true to scale
The same scale for all three, so what looks deeper here is deeper.
Where does the Kömmerling 76 MD fit?
New build
Suitable. If you want the lowest Uf, also look at the Gealan S 9000 MD or the Rehau Synego.
Renovation
Suitable, especially where depth is short: at 76 mm the frame sits less far into the wall. Bear in mind that all the windows open inwards.
Listed buildings and conservation areas
Check with your local planning authority; on a listed building or in a conservation area, uPVC is less readily allowed than aluminium or timber.
Fitting and Building Regulations in the UK
The fitting itself matters as much as the window. The Dutch fitting guidelines for uPVC windows and doors (VKG) come down to what good practice asks anywhere: the opening must allow an airtight, watertight, flat and square joint, and the loads on the window must be carried through fixings into the structure. We supply, we don't install, so this part is your installer's work.
Every window placed on the market in the EU carries CE marking to EN 14351-1: with it the manufacturer declares, on its own authority, that the product meets the essential characteristics in that standard, such as thermal transmittance, air permeability and resistance to wind load. It is a legal obligation, not a test by an independent body — and it is not a UK certification scheme, so we don't present it as one.
In England, Approved Document L sets the limit for replacement windows in an existing home at a U-value of 1.4 W/m²K or WER band B; for doors it is 1.4 W/m²K or DSER band C (more than 60% glazed) or DSER band D (other doors), and a replacement may not perform worse than what it replaces. That U-value is for the whole window (Uw). The Uf on this page is the frame profile alone, so on its own it doesn't tell you whether a window complies; the Uw of your window is stated in your offer. Replacing windows is notifiable building work in England and Wales: an installer registered with a competent person scheme, such as FENSA or Certass, notifies it, or you notify building control before work starts. Because we don't install, that sits with your installer. Scotland and Northern Ireland have their own rules. We don't give Building Regulations advice — check with your installer or building control.
Documents: data sheet
- Rovenzia data sheetPDF · 2 kB
- Rovenzia data sheet Kömmerling 76 MD (PDF)not yet available
Manufacturer's brochure
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Kömmerling 76 MD: frequently asked questions
Can you deliver this profile to me in the UK?
We are a Dutch supplier and deliver to the Netherlands, Belgium, Germany and France. Delivery to the UK is quoted with your offer. Production time for the Kömmerling 76 MD is 6 to 8 weeks. You enter your postcode with your quote request. There is no automatic price for this profile yet: your request always ends in a quote for your sizes.
Do the windows open inwards or outwards?
Inwards. The Kömmerling 76 MD is made for windows that open inwards: tilt and turn, side-hung or tilt-only. A window that opens outwards, top-hung or bottom-hung, isn't possible in this profile. If that is what you want, look at a Dutch version such as the Gealan S 9000.
What sizes can I order?
The configurator sets the limits for this profile: enter your sizes and it tells you whether they work before you request anything. A maximum size we have not yet confirmed with the supplier, we don't state here. The supplier checks your sizes for the quote; if you are close to a limit, ask us.
What exactly will arrive?
What you put together in the configurator is what arrives: the profile you chose, in your size and layout, with the glass and colour you picked. The summary — the last step before your request goes out — lists line by line what your configuration contains, and anything not listed there doesn't come with it. So you know before you unpack, not after. How and where it is delivered in the UK is set out in your offer.
Do you install it as well?
No. We supply, we don't install. That has one consequence you need to know: in England and Wales, replacing windows is **notifiable building work** under the Building Regulations. An installer registered with a competent person scheme, such as FENSA or Certass, notifies it; otherwise you notify building control before work starts. What we don't do is give Building Regulations advice — check with your installer or building control what applies in your situation.
Which glass and colours can I choose?
We offer six types of glass: HR++ double glazing (Ug 1.1), triple glazing (Ug 0.6), satin obscure glass in double and triple, and laminated safety glass class P4A in double (Ug 1.0) and triple (Ug 0.6). For colour there are through-coloured uPVC, dark and other foils for uPVC, and smooth or textured powder coating in a RAL colour for aluminium. Which combination is available on this profile is shown by the configurator — it refuses a combination that doesn't exist rather than quietly supplying it.
Can I send it back if I don't like it?
No. A window made to your measurements is made to order, and made-to-order goods fall outside the right to cancel. We say so before you order, not in the small print. In return, we take the risk out at the start: a size guarantee and a fixed procedure if anything is broken on delivery.
What if something is damaged on delivery?
Check it with the driver before you sign, and have any damage noted on the delivery note. Until the window is in your hands, damage in transit is **our risk**, not yours — we ship on DAP terms, so the risk stays with us until delivery. If you still find visible damage when you unpack, report it with photos **within two working days of delivery**. What you can't see on delivery isn't covered by that: for hidden defects your statutory rights apply unchanged.
What is the lead time?
Production time is 6 to 8 weeks, the same for all our suppliers (our figure as of 15 September 2026). Delivery to the UK is quoted with your offer. The quote itself is quicker: you'll hear from us within three working days of your request; if it takes longer, you'll hear that within the same three working days, with the date it will be ready.
Configure your window or door in Kömmerling 76 MD
Where we have a guide price, it is on the page, not behind a form — not a quote and not a final price; the amount for your sizes is in the made-to-measure quote.
Request my quote