Bottom-hung tilt-in window in Rehau Geneo
Bottom-hung tilt-in window in uPVC, in the Rehau Geneo profile. Standard size 1,100 × 800 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,100 × 800 mm
Configure this bottom-hung tilt-in windowSpecifications: Bottom-hung tilt-in window in Rehau Geneo
| Material | uPVC |
|---|---|
| Brand | Rehau |
| Profile | Rehau Geneo |
| Uf | 0.86 W/m²K |
| Frame depth | 86 mm |
| Sightline | 99 mm |
| Standard size of this layout | 1,100 × 800 mm |
| Maximum height | 2,800 mm |
| Maximum sash width | 1,600 mm |
| Sections in this layout | Hopper window |
| Delivery quoted with your offer | supplied, not installed |
Rehau Geneo — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a bottom-hung tilt-in window in Rehau Geneo?
GENEO is Rehau's other uPVC window system, with a core of glass-fibre reinforced plastic — Rehau calls it RAU-FIPRO — instead of the usual steel reinforcing sections in the chambers. That makes the profile just as stiff at 86 mm frame depth, and with Uf 0.86 W/m²K (version with thermal modules) it insulates better than any other uPVC profile we offer. The profile has 6 chambers, takes glass up to 53 mm and has been tested up to burglar resistance class RC3. The face of frame and sash together runs from 99 to 179 mm, and 110 to 214 mm on a French casement (figures given by Janwillem on 14 September 2026 from the Rehau data sheet).
Rehau's uPVC window with a glass-fibre core: 86 mm and Uf 0.86 W/m²K.
New build. Suitable, and with this insulation value one of the better uPVC profiles we offer. For a passive house or another very low-energy build, ask for the PHZ version: Uf 0.79 W/m²K according to the data sheet, the lowest of the four GENEO versions. Together with triple glazing (Ug 0.6) that is the uPVC combination we would look at first when the whole-window value has to be as low as possible; the exact Uw is in your quote.
Renovation. Suitable. Here the sash limits matter more than the frame: up to 1.45 × 1.45 m per window sash unreinforced and 1.60 × 1.80 m reinforced, so a wide existing opening is usually split into two or three sashes. Because the core is glass-fibre composite rather than steel, there are no steel sections in the chambers to conduct heat — one reason the Uf stays low in a profile only 86 mm deep.
Rehau Synego. Insulates slightly less well (Uf 0.94 against 0.86) and at 80 mm is even a little shallower — choose the SYNEGO if you prefer a wider standard sightline: 117 mm against 99 mm.
Aluprof MB-86N. Insulates better still (Uf 0.57 against 0.86) at a comparable frame depth of 77 mm, but in aluminium: stronger, in any RAL colour, at a higher price.
A hopper window, or bottom-hung tilt-in window, has its hinge at the bottom instead of the side, and that makes it the window for the spot you'd rather not reach with a handle.
What is a hopper window? In the UK the names hopper window, tilt-in window and bottom-hung window all mean the same thing: a window that tilts open inward from the top, with the hinge on the sill. That is the exact opposite of a side-hung casement, which is hinged at the side, and of a top-hung window, which is hinged at the top and pushes out at the bottom. Because the open sash leans into the room, rain that falls on it runs back down the glass and onto the outside rather than in. The practical result: you can fit a bottom-hung window high in a wall — above a basin, in a WC, above a kitchen worktop — and still operate it without a sash swinging into the room at head height. The opening is set to one fixed gap, not a range of positions as with tilting.
The standard size is 1,100 × 800 mm: wider than it is tall, to suit the narrow strips where a bottom-hung window usually goes. You change it to your own size; we make the window to the millimetre on the outside size of the frame. Choose one if you're mainly after ventilation in a spot where you rarely or never look out, and not if you also want to clean the glass from inside there — for that you need to be able to reach the window, as with a side-hung casement.
All about the Rehau Geneo profile All about the bottom-hung tilt-in window layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Bottom-hung tilt-in window in 20 other profiles
Other layouts in Rehau Geneo
Frequently asked questions about bottom-hung tilt-in window in Rehau Geneo
How large can a bottom-hung tilt-in window in Rehau Geneo be?
In Rehau Geneo we supply up to a height of 2,800 mm and a sash width of 1,600 mm; a wider opening is built from several sections. The standard size of this layout is 1,100 × 800 mm. There is no fixed maximum unit width; we check it when you send your request.
How much does a bottom-hung tilt-in window in Rehau Geneo cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits Rehau Geneo?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a bottom-hung tilt-in window in Rehau Geneo come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your bottom-hung tilt-in window in Rehau Geneo
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this bottom-hung tilt-in window