Front door with two side panels in Schüco LivIng Verdiept 6

The Schüco LivIng Verdiept 6° is the version of the LivIng Variant in which the sash is recessed into the outer frame, with a 6° chamfer on its face — the look most common on Dutch houses, with the sash set back. The system is 120 mm deep; the outer frame is 90 mm wide and, together with the sash, shows a 140 mm sightline (Schüco system manual, Systemschnitt 6°). The sash is 82 mm deep and carries a steel box section; the rebate takes glass from 24 to 52 mm. The stated value for the profile is Uf 1.1 W/m²K. For a sash flush with the outer frame and a shallower frame, see the Vlak (LivIng 82); for straight, clean lines on a recessed sash, see the City.

Schüco's uPVC system with the sash recessed at 6°: 120 mm frame depth, Uf 1.1 W/m²K.

A fixed glazed panel on both sides of the door: this frame gives the door a symmetrical surround and lights the hall from two sides.

Where the front door with side panel on the left and the front door with side panel on the right add one side panel, this layout adds one on each side. That gives a symmetrical look — the door in the middle, with the same amount of glass on each side — and the most light in the hall of the three side-panel options. It also needs the widest opening of the three.

The standard size is 1,850 × 2,100 mm: the 1,000 mm door in the middle, with a side panel of just over 400 mm on each side. If that width doesn't fit the wall, the front door with side panel on the left or on the right, with one side panel, is the narrower choice.

All about the Schüco LivIng Verdiept 6 profile All about the front door with two side panels layout