French doors in Aluplast Ideal 7000
French doors in uPVC, in the Aluplast Ideal 7000 profile. Standard size 1,600 × 2,200 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,600 × 2,200 mm
Configure this french doorsSpecifications: French doors in Aluplast Ideal 7000
| Material | uPVC |
|---|---|
| Brand | Aluplast |
| Profile | Aluplast Ideal 7000 |
| Uf | 1.00 W/m²K |
| Frame depth | 120 mm |
| Sightline | 133 mm |
| Outer frame width | 84 mm |
| Standard size of this layout | 1,600 × 2,200 mm |
| Maximum unit size | 4,000 × 2,600 mm |
| Maximum sash width | 1,400 mm |
| Sections in this layout | Door, Door |
| Delivery quoted with your offer | supplied, not installed |
Aluplast Ideal 7000 — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a french doors in Aluplast Ideal 7000?
The Ideal 7000 NL is Aluplast's block profile: a recessed, block-shaped look in which the sash sits back in the outer frame, designed for the Dutch style of building. The frame is 120 mm deep, the sash 85 mm, and inside there are six chambers with a double seal and a closed steel reinforcement as standard. The profile reaches Uf 1.00 W/m²K; for a complete window with glass of Ug 1.0, the system data give Uw 1.3 W/m²K. Frame and sash together have a 133 mm sightline.
Recessed block profile, 120 mm deep with six chambers, designed for Dutch elevations: windows, doors and every front door in our range.
New build. Suitable. As a front door too: every front door in our range fits this frame, with or without side panels. Windows go up to 4,000 × 2,600 mm, with an opening sash up to 1,400 mm wide; for a wider opening, an aluminium profile takes over.
Renovation. This is what it was made for. With the integrated 20 mm rebate the frame laps over the edge of the opening, so there is less making good around the old frame. Up to 4,000 × 2,600 mm.
K-vision Trend. Also recessed and also 120 mm deep, but Uf 1.20 instead of 1.00 and a sightline 3 mm narrower.
Gealan S 9000 Haax. Uf 1.10, and with a 119 mm sightline, 14 mm less profile in view. Square and straight, without the recessed sash.
Double French doors are two doors that open outwards from where they meet: together they give a wide opening with no fixed centre section in the way.
Where the back door layout has one door opening outwards, French doors put a second one beside it. Both doors open outwards from the middle, so the whole width can be cleared — unlike a sliding patio door or a bifold door, where part of the glass always stays in front of the opening or folds against the side. It does need room outside for two doors to swing open.
The standard size is 1,600 × 2,200 mm. That is narrower than a sliding patio door or a bifold door, but with no tracks or folding hardware — a simpler and often cheaper way to get a wide opening onto the garden if you don't need the full width of a sliding patio door.
All about the Aluplast Ideal 7000 profile All about the french doors layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
French doors in 28 other profiles
Other layouts in Aluplast Ideal 7000
Frequently asked questions about french doors in Aluplast Ideal 7000
How large can a french doors in Aluplast Ideal 7000 be?
In Aluplast Ideal 7000 we supply units up to 4,000 × 2,600 mm. The standard size of this layout is 1,600 × 2,200 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a french doors in Aluplast Ideal 7000 cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits Aluplast Ideal 7000?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a french doors in Aluplast Ideal 7000 come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your french doors in Aluplast Ideal 7000
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this french doors