Front door with two side panels in VEKA Softline 82 MD
Front door with two side panels in uPVC, in the VEKA Softline 82 MD profile. Standard size 1,850 × 2,100 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,850 × 2,100 mm
Configure this front door with two side panelsSpecifications: Front door with two side panels in VEKA Softline 82 MD
| Material | uPVC |
|---|---|
| Brand | VEKA |
| Profile | VEKA Softline 82 MD |
| Uf | 1.00 W/m²K |
| Frame depth | 82 mm |
| Sightline | 114 mm |
| Outer frame width | 73 mm |
| Standard size of this layout | 1,850 × 2,100 mm |
| Maximum unit size | 3,200 × 3,200 mm |
| Maximum sash width | 1,400 mm |
| Sections in this layout | Fixed glass, Door, Fixed glass |
| Delivery quoted with your offer | supplied, not installed |
VEKA Softline 82 MD — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a front door with two side panels in VEKA Softline 82 MD?
Softline 82 MD is the deepest VEKA profile we offer: 82 mm frame depth, seven chambers in the outer frame and six in the sash, and a Uf of 1.0 W/m²K. VEKA intends it for buildings from low-energy to passive house standard. Like the 76, it has a centre seal with three sealing levels and a glazing rebate 28 mm high. With matching hardware it reaches RC 2 burglar resistance. VEKA offers more than sixty colours and finishes, makes the profile in Germany and describes it as almost fully recyclable. If you are torn between the 76 and the 82, the difference lies mainly in insulation: Uf 1.0 against 1.1 and two more chambers in the outer frame. The window opens inwards: tilt and turn, side-hung, tilt-only or a door.
VEKA's deepest profile, for low-energy up to passive houses: 82 mm, 7 chambers and Uf 1.0 W/m²K.
New build. Suitable, and of the three Softline profiles the one that insulates best.
Renovation. Suitable. Do check that the 82 mm depth fits your existing wall opening.
VEKA Softline 76 MD. Same make and also a centre seal, but 6 mm shallower, with 5 chambers in the outer frame instead of 7. The Uf is 1.1 against 1.0 and the glass can be no more than 48 mm thick instead of 54 mm.
Schüco LivIng Vlak. The same 82 mm frame depth and the same Uf 1.0. On the LivIng Vlak the sash sits flush with the frame, and you see a little more profile: 120 mm against 114 mm.
A fixed glazed panel on both sides of the door: this frame gives the door a symmetrical surround and lights the hall from two sides.
Where the front door with side panel on the left and the front door with side panel on the right add one side panel, this layout adds one on each side. That gives a symmetrical look — the door in the middle, with the same amount of glass on each side — and the most light in the hall of the three side-panel options. It also needs the widest opening of the three.
The standard size is 1,850 × 2,100 mm: the 1,000 mm door in the middle, with a side panel of just over 400 mm on each side. If that width doesn't fit the wall, the front door with side panel on the left or on the right, with one side panel, is the narrower choice.
All about the VEKA Softline 82 MD profile All about the front door with two side panels layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Front door with two side panels in 28 other profiles
Other layouts in VEKA Softline 82 MD
Frequently asked questions about front door with two side panels in VEKA Softline 82 MD
How large can a front door with two side panels in VEKA Softline 82 MD be?
In VEKA Softline 82 MD we supply units up to 3,200 × 3,200 mm. The standard size of this layout is 1,850 × 2,100 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a front door with two side panels in VEKA Softline 82 MD cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits VEKA Softline 82 MD?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a front door with two side panels in VEKA Softline 82 MD come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your front door with two side panels in VEKA Softline 82 MD
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this front door with two side panels