Front door, side panel left in VEKA Softline 70 AD
Front door, side panel left in uPVC, in the VEKA Softline 70 AD profile. Standard size 1,450 × 2,100 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,450 × 2,100 mm
Configure this front door, side panel leftSpecifications: Front door, side panel left in VEKA Softline 70 AD
| Material | uPVC |
|---|---|
| Brand | VEKA |
| Profile | VEKA Softline 70 AD |
| Uf | 1.30 W/m²K |
| Frame depth | 70 mm |
| Sightline | 99 mm |
| Outer frame width | 67 mm |
| Standard size of this layout | 1,450 × 2,100 mm |
| Maximum unit size | 3,200 × 3,200 mm |
| Maximum sash width | 1,400 mm |
| Sections in this layout | Fixed glass, Door |
| Delivery quoted with your offer | supplied, not installed |
VEKA Softline 70 AD — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a front door, side panel left in VEKA Softline 70 AD?
Softline 70 AD is VEKA's entry-level profile: 70 mm frame depth, five chambers and a Uf of 1.3 W/m²K. AD stands for Anschlagdichtung, a rebate seal. The profile works with two sealing levels, one inside and one outside; it has no third seal in the middle. That makes it slimmer and simpler than the MD versions. The rebate takes glass up to 42 mm. The design is classic, with slightly rounded edges, and the sash comes in a stepped and a semi-stepped version. The outer walls are 3 mm thick, which puts the profile in class A of DIN EN 12608. VEKA supplies it in more than fifty colours and woodgrain finishes, with grey seals. The window opens inwards: tilt and turn, side-hung, tilt-only or a door.
VEKA's entry-level uPVC window with a rebate seal: 70 mm, 5 chambers and Uf 1.3 W/m²K.
New build. Possible, but at Uf 1.3 the profile insulates less well than most of the uPVC profiles we offer. For a new build, the Softline 76 MD and 82 MD are the more obvious choice.
Renovation. Suitable, especially where depth is short: at 70 mm the frame sits less far into the wall.
VEKA Softline 76 MD. Same make, 6 mm deeper and with a centre seal: three seals instead of two. The Uf drops from 1.3 to 1.1 and it takes glass up to 48 mm instead of 42 mm. You do see more profile: 112 mm of frame and sash against 99 mm.
VEKA Softline 82 MD. The deepest Softline: 82 mm, 7 chambers in the outer frame and Uf 1.0 against 1.3. It takes glass up to 54 mm. Choose it if insulation matters more to you than a slim profile.
A fixed glazed panel on the left of the door: this frame brings more light into the hall without widening the door itself.
The side panel is fixed, not a second door: it doesn't open, it only lets light in. The door stays the same 1,000 mm wide as in the front door layout — so you gain light without the door becoming heavier or wider to open and close.
The standard size is 1,450 × 2,100 mm: the door plus a narrower side panel beside it. Which side the panel goes on usually depends on how you approach the door, or on where the wall has more room. If you want light on both sides, the front door with side panels on both sides is the wider option; if you would rather have no side panel, the front door on its own is the narrower one.
All about the VEKA Softline 70 AD profile All about the front door, side panel left layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Front door, side panel left in 28 other profiles
Other layouts in VEKA Softline 70 AD
Frequently asked questions about front door, side panel left in VEKA Softline 70 AD
How large can a front door, side panel left in VEKA Softline 70 AD be?
In VEKA Softline 70 AD we supply units up to 3,200 × 3,200 mm. The standard size of this layout is 1,450 × 2,100 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a front door, side panel left in VEKA Softline 70 AD cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits VEKA Softline 70 AD?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a front door, side panel left in VEKA Softline 70 AD come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your front door, side panel left in VEKA Softline 70 AD
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this front door, side panel left