Fixed window with top light in Aluplast HST 85
Fixed window with top light in uPVC, in the Aluplast HST 85 profile. Standard size 1,000 × 1,800 mm; you enter your own sizes in the configurator, where this profile is already selected.
Standard size 1,000 × 1,800 mm
Configure this fixed window with top lightSpecifications: Fixed window with top light in Aluplast HST 85
| Material | uPVC |
|---|---|
| Brand | Aluplast |
| Profile | Aluplast HST 85 |
| Uf | 1.10 W/m²K |
| Frame depth | 197 mm |
| Standard size of this layout | 1,000 × 1,800 mm |
| Maximum unit size | 6,500 × 2,700 mm |
| Maximum sash width | 2,000 mm |
| Sections in this layout | Fixed glass, Fixed glass |
| Delivery quoted with your offer | supplied, not installed |
Aluplast HST 85 — corner section
Glazing for this profile
- Double glazing (HR++) — Ug 1.1 W/m²K
- Obscure glass, double — Ug 1.1 W/m²K
- Safety glass, double — Ug 1.0 W/m²K
- Triple glazing (HR+++) — Ug 0.6 W/m²K
- Obscure glass, triple — Ug 0.6 W/m²K
- Safety glass, triple — Ug 0.6 W/m²K
35 colours for uPVC windows and doors
From measuring to delivery in four steps
- 1
Configure
Choose type, profile, size, glass and colour in the configurator. You see your window in the drawing straight away.
- 2
Quote within 3 working days
We ask the manufacturer for the price and send you a quote for your sizes.
- 3
Accept
Once you accept, your window goes into production. You pay after accepting, by invoice.
- 4
Delivery
Delivery to the UK is quoted with your offer. You fit it yourself or with your own installer.
Why a fixed window with top light in Aluplast HST 85?
A lift-and-slide door works differently from an ordinary sliding door: with the handle you lift the leaf off its seal, slide it aside and lower it again. That is why it can be heavy and large and still seal well. The Aluplast HST 85 carries leaves of up to 400 kg. With two opening leaves and a centre mullion that slides with them, a wide opening can be opened fully in the middle. The frame is 197 mm deep, and the profile reaches Uf 1.10 W/m²K.
uPVC lift-and-slide door, 197 mm deep, for large areas of glass: leaves up to 400 kg, two opening leaves and a centre mullion that slides with them.
Two fixed panes one above the other, divided by a transom: a narrow, tall window that only lets light through.
This window splits into two fixed panes: a small one at the top and a larger one below. Neither opens — it is the fixed window raised into a taller, narrower shape. That suits a stairwell, a hallway, or a strip of wall next to a door that already lets in enough air, where you're mainly after height and light rather than ventilation.
The standard size is 1,000 × 1,800 mm, with the top pane taking a quarter of the height and the lower pane the rest. If you do want to ventilate in exactly that spot, the fixed window with tilt-in top light — the same two-part window with a bottom-hung sash instead of the fixed top light — is the form that provides for it, without the look changing.
All about the Aluplast HST 85 profile All about the fixed window with top light layout
Know what you want? Put it together.
No form first: you watch your window take shape as you choose. The price follows in the quote, within three working days.
Fixed window with top light in 31 other profiles
Other layouts in Aluplast HST 85
Frequently asked questions about fixed window with top light in Aluplast HST 85
How large can a fixed window with top light in Aluplast HST 85 be?
In Aluplast HST 85 we supply units up to 6,500 × 2,700 mm. The standard size of this layout is 1,000 × 1,800 mm; the configurator refuses a size outside the maximum. If you are close to the limit, split the window into sections or choose a profile that goes further.
How much does a fixed window with top light in Aluplast HST 85 cost?
That depends on size, glass and colour, which is why there is no amount here. You configure the window to your sizes, we ask the manufacturer for the price, and within three working days you receive a made-to-measure quote — with no obligation.
Which glass fits Aluplast HST 85?
In the configurator you choose from: Double glazing (HR++), Obscure glass, double, Safety glass, double, Triple glazing (HR+++), Obscure glass, triple, Safety glass, triple. The Ug value is shown for each type of glass; how well the whole window insulates depends on the glass and the profile together.
What colours does a fixed window with top light in Aluplast HST 85 come in?
For uPVC windows and doors you choose from 35 colours, including White, Cream, coloured through, Cream foil, Anthracite AP40. Inside and outside can differ; you choose both in the configurator.
How long does it take, and do you fit it as well?
Once you accept the quote, the window goes into production; the production time is 6 to 8 weeks. Delivery to the UK is quoted with your offer. We supply, we don't install — you fit it yourself or with your own installer.
Configure your fixed window with top light in Aluplast HST 85
Choose type, profile, size, glass and colour. Within three working days you receive a quote for your sizes — with no obligation.
Configure this fixed window with top light